ISO 8009 to ISO 8995

ISO 8009-1:1997
Reusable rubber contraceptive diaphragms. Classification, sampling and requirements

ISO 8009-2:1985
Reusable rubber contraceptive diaphragms. Determination of size

ISO 8009-3:1985
Reusable rubber contraceptive diaphragms. Determination of dome thickness

ISO 8009-4:1996
Reusable rubber contraceptive diaphragms. Freedom from visible defects

ISO 8009-5:1996
Reusable rubber contraceptive diaphragms. Determination of tensile properties

ISO 8009-6:1985
Reusable rubber contraceptive diaphragms. Determination of deterioration after accelerated ageing

ISO 8009-7:1985
Reusable rubber contraceptive diaphragms. Determination of compression resistance of coil spring and flat spring diaphragms

ISO 8009-8:1985
Reusable rubber contraceptive diaphragms. Determination of twisting during compression of coil spring and flat spring diaphragms

ISO 8009-9:1985
Reusable rubber contraceptive diaphragms. Packaging and labelling

ISO 8009-10:1985
Reusable rubber contraceptive diaphragms. Recommendations for storage

ISO 8015:1985
Technical drawings. Fundamental tolerancing principle

ISO 8020:2002
Tools for pressing. Punches with cylindrical head and straight or reduced shank

ISO 8028:2000
Rubber and/or plastics hose assemblies for airless paint spraying. Specification

ISO 8030:1998
Rubber and plastics hoses. Method of test for flammability

ISO 8031:1997
Rubber and plastics hoses and hose assemblies. Determination of electrical resistance

ISO 8032:1999
Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)

ISO 8038-2:2001
Optics and optical instruments. Screw threads for microscope objectives and related nosepieces. Screw thread type M25 x 0,75 mm

ISO 8040:2001
Optics and optical instruments. Microscopes. Dimensions of tube slide and tube slot connections

ISO 8044:2000
Corrosion of metals and alloys. Basic terms and definitions

ISO 8051:1999
Long shank taps with nominal diameters from M3 to M10. Full-diameter shank taps with recess

ISO 8058:1999
Air cargo. Insulated containers. Thermal efficiency requirements

ISO 8066-2:2001
Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification. Refrigerant 134a

ISO 8067:1995
Flexible cellular polymeric materials. Determination of tear strength

ISO 8082:2003
Self-propelled machinery for forestry. Roll-over protective structures. Laboratory tests and performance requirements

ISO 8085-1:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Fittings for socket fusion using heated tools

ISO 8085-2:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings

ISO 8085-3:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Electrofusion fittings

ISO 8092-1:1998
Road vehicles. Connections for on-board electrical wiring harnesses. Tafor single-pole connections. Dimensions and specific requirements

ISO 8092-2:2002
Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements

ISO 8092-3:1999
Road vehicles. Connections for on-board electrical wiring harnesses. Tafor multi-pole connections. Dimensions and specific requirements

ISO 8092-4:1999
Road vehicles. Connections for on-board electrical wiring harnesses. Pins for single- and multi-pole connections. Dimensions and specific requirements

ISO 8097:2001
Aircraft. Minimum airworthiness requirements and test conditions for certified air cargo unit load devices

ISO 8098:2002
Cycles. Safety requirements for bicycles for young children

ISO 8099:2001
Small craft. Toilet waste retention systems

ISO 8106:1985
Glass containers. Determination of capacity by gravimetric method. Test method

ISO 8113:1985
Glass containers. Resistance to vertical load. Test method

ISO 8114:1990
Textile machinery and accessories. Spindles for ring-spinning and doubling machines. List of equivalent terms

ISO 8116-9:1991
Textile machinery and accessories. Beams for winding. Dyeing beams for textile fabrics

ISO 8117:2003
Textile machinery. Knitting machines. Nominal diameters of circular machines

ISO 8118:1986
Weaving machines. Temple cylinders

ISO 8119-3:1992
Textile machinery and accessories. Needles for knitting machines. Terminology. Compound needles

ISO 8121:1986
Textile machinery. Knitting machines. Nameplate information

ISO 8122:2003
Textile machinery. Knitting machines. Number of needles for circular knitting machines of large nominal diameter

ISO 8126:2000
Micrographics. Duplicating film, silver, diazo and vesicular. Visual density. Specifications and measurement.

ISO 8127-1:1989
Micrographics. A6 size microfilm jackets. Five-channel jacket for 16 mm microfilm

ISO 8127-2:1999
Micrographics. A6 size microfilm jackets. Other types of jacket for 16 mm and 35 mm microfilm

ISO 8130-9:2000
Coating powders. Sampling

ISO 8131:1992
Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances

ISO 8132:1986
Hydraulic fluid power. Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series. Mounting dimensions for accessories

ISO 8133:1991
Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Accessory mounting dimensions

ISO 8135:1999
Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Tolerances

ISO 8137:1986
Hydraulic fluid power. Single rod cylinders, 250 bar (25 MPa) series. Port dimensions

ISO 8138:1998
Hydraulic fluid power. Single rod cylinders, 16 MPA (160 bar) compact series. Port dimensions

ISO 8139:1991
Pneumatic fluid power. Cylinders, 1 100 kPa (10 bar) series. Rod end spherical eyes. Mounting dimensions

ISO 8140:1991
Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Rod end clevis. Mounting dimensions

ISO 8166:2003
Resistance welding. Procedure for the evaluation of the life of spot welding electrodes using constant machine settings

ISO 8178-1:1996
Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions

ISO 8178-2:1997
Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions at site

ISO 8178-3:1994
Reciprocating internal combustion engines. Exhaust emission measurement. Definitions and methods of measurement of exhaust gas smoke under steady state conditions

ISO 8178-4:1996
Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles for different engine applications

ISO 8178-5:1997
Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels

ISO 8178-6:2001
Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and tests

ISO 8178-7:1996
Reciprocating internal combustion engines. Exhaust emission measurement. Engine family determination

ISO 8178-8:1996
Reciprocating internal combustion engines. Exhaust emission measurement. Engine group determination

ISO 8178-9:2000
Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

ISO 8178-10:2002
Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

ISO 8185:1998
Humidifiers for medical use. General requirements for humidification systems

ISO 8192:1995
Water quality. Test for the inhibition of oxygen consumption by activated sludge

ISO 8205-1:2002
Water-cooled secondary connection cables for resistance welding. Dimensions and requirements for double-conductor connection cables

ISO 8205-2:2002
Water-cooled secondary connection cables for resistance welding. Dimensions and requirements for single-conductor connection cables

ISO 8205-3:1997
Water-cooled secondary connection cables for resistance welding. Test requirements

ISO/IEC 8211:1994
Information technology. Specification for a data descriptive file for information interchange

ISO 8216-99:2002
Petroleum products. Fuels (class F). Classification. General

ISO 8222:2002
Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks

ISO 8224-1:2003
Traveller irrigation machines. Operational characteristics and laboratory and field test methods

ISO 8229:1991
Operations and baths relating to dry-cleaning machines. Vocabulary

ISO 8230:1998
Safety requirements for dry-cleaning machines using perchloroethylene

ISO 8249:2000
Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals

ISO 8253-1:1998
Acoustics. Audiometric test methods. Basic pure tone air and bone conduction threshold audiometry

ISO 8253-2:1998
Acoustics. Audiometric test methods. Sound field audiometry with pure tone and narrow-band test signals

ISO 8253-3:1998
Acoustics. Audiometric test methods. Speech audiometry

ISO 8254-1:2003
Paper and board. Measurement of specular gloss. 75$0D gloss with a converging beam, TAPPI method

ISO 8254-2:2003
Paper and board. Measurement of specular gloss. 75$0D gloss with a parallel beam, DIN method

ISO 8256:1997
Plastics. Determination of tensile-impact strength

ISO 8257-1:1987
Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials. Designation

ISO 8257-2:2001
Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials. Preparation of test specimens and determination of properties

ISO 8261:2002
Milk and milk products. General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination

ISO 8282:1997
Dental equipment. Mercury and alloy mixers and dispensers

ISO 8289:2001
Vitreous and porcelain enamels. Low voltage test for detecting and locating defects

ISO 8290:1998
Vitreous and porcelain enamels. Determination of resistance to sulfuric acid at room temperature

ISO 8292:1995
Animal and vegetable fats and oils. Determination of solid fat content. Pulsed nuclear magnetic resonance method

ISO 8294:2000
Animal and vegetable fats and oils. Determination of copper, iron and nickel contents. Graphite furnace atomic absorption method

ISO 8297:1994
Acoustics. Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment. Engineering method

ISO 8307:1998
Flexible cellular polymeric materials. Determination of resilience

ISO 8308:1996
Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls

ISO 8311:1996
Refrigerated light hydrocarbon fluids. Calibration of membrane tanks and independent prismatic tanks in ships. Physical measurement

ISO 8312:1999
Rubber compounding ingredients. Stearic acid. Definition and test methods

ISO 8316:1997
Method of liquid flow in closed conduits. Method by collection of the liquid in a volumetric tank

ISO 8318:2002
Packaging. Complete, filled transport packages and unit loads. Sinusoidal vibration tests using a variable frequency

ISO 8320-1:2003
Contact lenses and contact lens care products. Vocabulary. Contact lenses

ISO 8320-2:2001
Contact lenses and contact lens care products. Vocabulary. Contact lens care products

ISO 8321-1:2002
Optics and optical instruments. Contact lenses. Rigid corneal and scleral contact lenses

ISO 8321-2:2000
Optics and optical instruments. Contact lenses. Single-vision hydrogel contact lenses

ISO 8323:1985
Freight containers. Air/surface (intermodel) general purpose containers. Specification and tests

ISO/IEC 8326:1996
Information technology. Open systems interconnection. Session service definition

ISO/IEC 8327-1:1996
Information technology. Open systems interconnection. Connection-oriented session protocol. Protocol specification

ISO/IEC 8327-2:1996
Information technology. Open systems interconnection. Connection-oriented session protocol. Protocol Implementation Conformance Statement (PICS) proforma

ISO 8330:2000
Rubber and plastics hoses and hose assemblies. Vocabulary

ISO/IEC 8348:1996
Information technology. Open systems interconnection. Network service definition

ISO 8349:2002
Road vehicles. Measurement of road surface friction

ISO 8351-1:1997
Packaging. Method of specification for sacks. Paper sacks

ISO 8351-2:1997
Packaging. Method of specification for sacks. Sacks made from thermoplastic flexible film

ISO 8359:1997
Medical electrical equipment. Oxygen concentrators for medical use. Safety requirements

ISO 8362-3:2003
Injection containers and accessories. Aluminium caps for injection vials

ISO TR 8363:1997
Measurement of liquid flow in open channels. General guidelines for the selection of method

ISO 8367-1:1997
Packaging. Dimensional tolerances for general purpose sacks. Paper sacks

ISO 8367-2:1997
Packaging. Dimensional tolerances for general purpose sacks. Sacks made from thermoplastic flexible film

ISO 8368:1999
Hydrometric determinations. Flow measurements in open channels using structures. Guidelines for the selection of structure

ISO 8371:1994
Iron ores. Determination of decrepitation index

ISO 8373:1996
Manipulating industrial robots. Vocabulary

ISO 8374:2001
Photography. Determination of ISO safelight conditions

ISO 8379:1998
Rough terrain trucks. Stability tests

ISO 8381:2000
Milk based infant foods. Determination of fat content. Gravimetric method (Reference method)

ISO 8384:2001
Ships and marine technology. Dredgers. Vocabulary

ISO 8385:1999
Ships and marine technology. Dredgers. Classification

ISO 8388:1998
Knitted fabrics. Types. Vocabulary

ISO 8395:1995
Cinematography. Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes. Specifications

ISO 8401:1995
Metallic coatings. Review of methods of measurement of ductility

ISO 8402:1995
Quality management and quality assurance. Vocabulary

ISO 8405:1998
Tools for moulding. Ejector sleeves with cylindrical head. Basic series for general purposes

ISO 8406:2001
Tools for moulding. Mould bases. Round locating elements and spacers

ISO 8419:2003
Belt drives. Narrow V-belts. Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)

ISO 8420:2002
Animal and vegetable fats and oils. Determination of content of polar compounds

ISO 8429:1997
Optics and optical instruments. Ophthalmology. Graduated dial scale

ISO 8432:1987
Essential oils. Analysis by high performance liquid chromatography. General method

ISO 8434-1:1998
Metallic tube connections for fluid power and general use. 24$0D compression fittings

ISO 8434-2:1994
Metallic tube connections for fluid power and general use. 37$0D flared fittings

ISO 8434-3:1995
Metallic tube connections for fluid power and general use. O-ring face seal fittings

ISO 8434-4:2000
Metallic tube connections for fluid power and general use. 24$0D cone connectors with O-ring weld-on nipples

ISO 8439:1990
Forms design. Basic layout

ISO 8442-1:1998
Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for cutlery for the preparation of food

ISO 8442-2:1998
Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for stainless steel and silver-plated cutlery

ISO 8442-3:1998
Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for silver-plated table and decorative holloware

ISO 8442-4:1998
Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for gold-plated cutlery

ISO 8442-6:2001
Materials and articles in contact with foodstuffs. Cutlery and table holloware. Lightly silver plated table holloware protected by laquer

ISO 8442-7:2001
Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for table cutlery made of silver, other precious metals and their alloys

ISO 8442-8:2001
Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for silver table and decorative holloware

ISO 8443:1999
Rolling bearings. Radial ball bearings with flanged outer ring. Flange dimensions

ISO 8459-2:1992
Information and documentation. Bibliographic data element directory. Acquisitions applications

ISO 8459-3:1994
Information and documentation. Bibliographic data element directory. Information retrieval applications

ISO 8467:1995
Water quality. Determination of permanganate index

ISO 8468:1995
Ship's bridge layout and associated equipment. Requirements and guidelines

ISO 8469:1995
Small craft. Non-fire-resistant fuel hoses

ISO/IEC 8473-1:1998
Information technology. Protocol for providing the connectionless-mode network service. Protocol specification

ISO/IEC 8473-2:1996
Information technology. Protocol for providing the connectionless-mode network service. Provision of the underlying service by an ISO/IEC 8802 subnetwork

ISO/IEC 8473-3:1995
Information technology. Protocol for providing the connectionless-mode network service. Provision of the underlying service by an X.25 subnetwork

ISO/IEC 8473-4:1995
Information technology. Protocol for providing the connectionless-mode network service. Provision of the underlying service by a subnetwork that provides the OSI data link service

ISO/IEC 8473-5:1997
Information technology. Protocol for providing the connectionless-mode network service. Provision of the underlying service by ISDN circuit-switched B-channels

ISO/IEC 8480:1995
Information technology. Telecommunications and information exchange between systems. DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits

ISO/IEC 8481:1996
Information technology. Telecommunications and information exchange between systems. DTE to DTE direct connections

ISO/IEC 8482:1994
Information technology. Telecommunications and information exchange between systems. Twisted pair multipoint interconnections

ISO 8486-1:1996
Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220

ISO 8486-2:1996
Bond abrasives. Determination and designation of grain size distribution. Macrogrits F230 to F1200

ISO 8497:1997
Thermal insulation. Determination of steady-state thermal transmission properties of thermal insulation for circular pipes

ISO 8501-1:2001
Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

ISO 8501-1:Supplement:2001
Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives

ISO 8501-2:2001
Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of previously coated steel substrates after localized removal of previous coatings

DD ENV ISO 8502-1:2001
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field test for soluble iron corrosion products

ISO 8502-2:2000
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces

ISO 8502-3:2000
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)

ISO 8502-4:2000
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Guidance on the estimation of the probability of condensation prior to paint application

ISO 8502-6:2000
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Extraction of soluble contaminants for analysis. The Bresle method

ISO 8502-9:2001
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the conductometric determination of water-soluble salts

ISO 8503-1:1995
Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

ISO 8503-2:1995
Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure

ISO 8503-3:1995
Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure

ISO 8503-4:1995
Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure

ISO 8504-1:2001
Preparation of steel substrates before application of paints and related products. Surface preparation methods. General principles

ISO 8504-2:2001
Preparation of steel substrates before application of paints and related products. Surface preparation methods. Abrasive blast cleaning

ISO 8504-3:2001
Preparation of steel substrates before application of paints and related products. Surface preparation methods. Hand- and power-tool cleaning

ISO 8514-1:2000
Micrographics. Alphanumeric computer output microforms. Quality control. Characteristics of the test slide and test data

ISO 8514-2:2000
Micrographics. Alphanumeric computer output microforms. Quality control. Method

ISO 8529-1:2001
Reference neutron radiations. Characteristics and methods of production

ISO 8529-2:2000
Reference neutron radiations. Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field

ISO 8529-3:1998
Reference neutron radiations. Calibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence

ISO 8532:1995
Securities. Format for transmission of certificate numbers

ISO 8535-1:1996
Compression ignition engines. Steel tubes for high pressure fuel injection pipes. Requirements for seamless cold drawn single wall tubes

ISO 8536-1:2003
Infusion equipment for medical use. Infusion glass bottles

ISO 8536-2:2002
Infusion equipment for medical use. Closures for infusion bottles

ISO 8536-3:1999
Infusion equipment for medical use. Aluminium caps for infusion bottles

ISO 8537:1995
Sterile, single-use syringes, with or without needle, for insulin

ISO 8543:1998
Textile floor coverings. Methods for determination of mass

ISO 8548-4:1998
Prosthetics and orthotics. Limb deficiencies. Description of causal conditions leading to amputation

ISO 8560:1999
Construction drawings. Representation of modular sizes, lines and grids

ISO 8561:1996
Household refrigerating appliances. Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by forced air circulation. Characteristics and test methods

ISO 8565:1995
Metals and alloys. Atmospheric corrosion testing. General requirements for field tests

ISO 8566-4:1998
Cranes. Cabins. Jib cranes

ISO 8567:2002
Cinematography. Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints. Position and dimensions

ISO/IEC 8571-5:1990
Information processing systems. Open systems interconnection. File transfer, access and management. Protocol Implementation Conformance Statement Proforma

ISO 8573-1:2001
Compressed air for general use. Contaminants and purity classes

ISO 8573-2:1996
Compressed air for general use. Test methods for aerosol oil content

ISO 8573-3:1999
Compressed air for general use. Test methods for measurement of humidity

ISO 8573-4:2001
Compressed air for general use. Test methods for solid particle content

ISO 8573-5:2001
Compressed air for general use. Test methods for oil vapour and organic solvent content

ISO 8573-6:2003
Compressed air for general use. Test methods for gaseous contaminant content

ISO 8573-7:2003
Compressed air for general use. Test method for viable microbiological contaminant content

ISO 8579-1:2002
Acceptance code for gear units. Test code for airborne sound

ISO 8580:1995
Rubber and plastics hoses. Determination of ultra-violet resistance under static conditions

ISO 8581:1994
Photography. Electronic flash equipment. Connectors to synchro-cord

ISO 8584-1:1990
Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stress. Polyolefin pipes

ISO 8590:1994
Cinematography. Audio records on 70 mm motion picture release prints with magnetic stripes. Recorded characteristic

ISO 8596:1996
Visual acuity test types. Specification for Landolt ring optotype for non-clinical purposes

ISO 8597:1996
Visual acuity test types. Method for correlating optotypes used for non-clinical purposes

ISO 8598:1998
Optics and optical instruments. Focimeters

ISO 8599:1997
Optics and optical instruments. Contact lenses. Determination of the spectral and luminous transmittance

ISO 8600-1:1997
Optics and optical instruments. Medical endoscopes and endoscopic accessories. General requirements

ISO 8600-2:2002
Optics and optical instruments. Medical endoscopes and endoscopic accessories. Particular requirements for rigid bronchoscopes

ISO 8600-4:1997
Optics and optical instruments. Medical endoscopes and endoscopic accessories. Determination of maximum width of insertion portion

ISO/IEC 8602:1995
Information technology. Protocol for providing the OSI connectionless-mode transport service

ISO 8605:2001
Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification

ISO TR 8610:1984
Light gauge metal containers. Round vent-hole cans with soldered ends for milk and milk products. Capacities and related diameters

ISO 8611:1991
General-purpose flat pallets for through transit of goods. Test methods

ISO 8612:2001
Ophthalmic instruments. Tonometers

ISO 8619:1998
Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate

ISO 8620:1996
Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus

ISO 8622:1998
Cinematography. Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes. A-chain reproduction characteristics

ISO 8624:2002
Ophthalmic optics. Spectacle frames. Measuring system and terminology

ISO/IEC 8632-3:1999
Information technology. Computer graphics. Metafile for the storage and transfer of picture description information. Binary encoding

ISO/IEC 8632-4:1999
Information technology. Computer graphics. Metafile for the storage and transfer of picture description information. Clear text encoding

ISO 8640-1:1990
Textile machinery and accessories. Flat warp knitting machines. Vocabulary. Driving mechanisms, supports and knitting elements

ISO 8640-2:1990
Textile machinery and accessories. Flat warp knitting machines. Vocabulary. Warp let-off, fabric take-up and batching

ISO 8640-3:2002
Textile machinery and accessories. Flat warp knitting machines. Vocabulary. Vocabulary of patterning devices

ISO/IEC 8650-2:1997
Information technology. Open systems interconnection. Protocol specification for the association control service element. Protocol implementation conformance statement (PICS) proforma

ISO/IEC 8651-4:1995
Information technology. Computer graphics. Graphical Kernel System (GKS) language bindings. C

ISO/IEC 8652:1995
Programming languages. Ada

ISO 8655-1:2002
Piston-operated volumetric apparatus. Terminology, general requirements and user recommendations

ISO 8655-2:2002
Piston-operated volumetric apparatus. Piston pipettes

ISO 8655-3:2002
Piston-operated volumetric apparatus. Piston burettes

ISO 8655-4:2002
Piston-operated volumetric apparatus. Dilutors

ISO 8655-5:2002
Piston-operated volumetric apparatus. Dispensers

ISO 8655-6:2002
Piston-operated volumetric apparatus. Gravimetric methods for the determination of measurement error

ISO 8660:2002
Plastics. Determination of permanganate absorption number of caprolactam. Spectrometric method

ISO 8662-4:1995
Hand-held portable power tools. Measurement of vibrations at the handle. Grinding machines

ISO 8662-6:1995
Hand-held portable power tools. Measurement of vibrations at the handle. Impact drills

ISO 8662-7:1997
Hand-held portable power tools. Measurement of vibrations at the handle. Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action

ISO 8662-8:1997
Hand-held portable power tools. Measurement of vibrations at the handle. Polishers and rotary, orbital and random orbital sanders

ISO 8662-9:1997
Hand-held portable power tools. Measurement of vibrations at the handle. Rammers

ISO 8662-10:1998
Hand-held portable power tools. Measurement of vibrations at the handle. Nibblers and shears

ISO 8662-12:1997
Hand-held portable power tools. Measurement of vibrations at the handle. Saws and files with reciprocating action and saws with rotating or oscillating action

ISO 8662-13:1997
Hand-held portable power tools. Measurement of vibrations at the handle. Die grinders

ISO 8662-14:1997
Hand-held portable power tools. Measurement of vibrations at the handle. Stone-working tools and needle scalers

ISO 8665:1996
Small craft. Marine propulsion engines and systems. Power measurements and declarations

ISO 8666:2002
Small craft. Principal data

ISO 8669-2:1997
Urine collection bags. Requirements and test methods

ISO 8670-2:1997
Ostomy collection bags. Requirements and test methods

ISO 8670-3:2000
Ostomy collection bags. Determination of odour transmission of colostomy and ileostomy bags

ISO 8673:2001
Hexagon nuts, style 1, with metric fine pitch thread. Product grades A and B

ISO 8674:2001
Hexagon nuts, style 2, with metric fine pitch thread. Product grades A and B

ISO 8675:2001
Hexagon thin nuts (chamfered) with metric fine pitch thread. Product grades A and B

ISO 8676:2001
Hexagon head screws with metric fine pitch thread. Product grades A and B

ISO 8689-1:2000
Water quality. Biological classification of rivers. Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates

ISO 8689-2:2000
Water quality. Biological classification of rivers. Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates

ISO 8693:1998
Tools for moulding. Flat ejector pins

ISO 8694:1998
Tools for moulding. Shouldered ejector pins

ISO 8697:1999
Crude petroleum and petroleum products. Transfer accountability. Assessment of on board quantity (OBQ) and quantity remaining on board (ROB)

ISO 8727:1997
Mechanical vibration and shock. Human exposure. Biodynamic coordinate systems

ISO 8728:1999
Ships and marine technology. Marine gyro-compasses

ISO 8729:1999
Ships and marine technology. Marine radar reflectors

ISO 8733:1998
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel

ISO 8734:1998
Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)

ISO 8735:1998
Parallel pins with internal thread, of hardened steel or martensitic stainless steel

ISO 8739:1998
Grooved pins. Full-length parallel grooved, with pilot

ISO 8740:1998
Grooved pins. Full-length parallel grooved, with chamfer

ISO 8741:1998
Grooved pins. Half-length reverse-taper grooved

ISO 8742:1998
Grooved pins. One-third-length centre grooved

ISO 8743:1998
Grooved pins. Half-length centre grooved

ISO 8744:1998
Grooved pins. Full-length taper grooved

ISO 8745:1998
Grooved pins. Half-length taper grooved

ISO 8746:1998
Grooved pins with round head

ISO 8747:1998
Grooved pins with countersunk head

ISO 8748:1998
Spring-type straight pins. Coiled, heavy duty

ISO 8750:1998
Spring-type straight pins. Coiled, standard duty

ISO 8751:1998
Spring-type straight pins. Coiled, light duty

ISO 8752:1998
Spring-type straight pins. Slotted, heavy duty

ISO 8764-1:1999
Assembly tools for screws and nuts. Screwdrivers for cross-recessed head screws. Driver points

ISO 8765:2001
Hexagon head bolts with metric fine pitch thread. Product grades A and B

ISO 8778:2003
Pneumatic fluid power. Standard reference atmosphere

ISO 8780-1:1995
Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Introduction

ISO 8780-2:1995
Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an oscillatory shaking machine

ISO 8780-3:1995
Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a high speed impeller mill

ISO 8780-4:1995
Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill

ISO 8780-5:1995
Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an automatic muller

ISO 8780-6:1995
Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a triple-roll mill

ISO 8781-1:1995
Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the charge in tinting strength of coloured pigments

ISO 8781-2:1995
Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the change in fineness of grind

ISO 8781-3:1995
Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the change in gloss

ISO 8785:1999
Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters

ISO 8788:2000
Aerospace. Nuts, metric. Tolerances of form and position

ISO 8789:1994
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification

ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints

ISO 8799:1996
Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulfates. Method for determination of unsulfated matter content

ISO 8805:1988
Information processing systems. Computer graphics. Graphical kernel system for three dimensions (GKS-3D) functional description

ISO/IEC 8806-4:1991
Information technology. Computer graphics. Graphical Kernel System for three dimensions (GKS-3D) language bindings. C

ISO 8819:1995
Methods of test for petroleum and its products. Liquefied petroleum gases. Detection of hydrogen sulfide. Lead acetate method

ISO/IEC 8822:1994
Information technology. Open systems interconnection. Presentation service definition

ISO/IEC 8823-2:1997
Information technology. Open systems interconnection. Connection-orientated presentation protocol. Connection-oriented presentation protocol: Protocol implementation conformance statement (PICS) proforma

ISO 8826-1:1995
Technical drawings. Roller bearings. General simplified representation

ISO 8826-2:1997
Technical drawings. Roller bearings. Detailed simplified representation

ISO 8835-2:1999
Inhalational anaesthesia systems. Anaesthetic breathing systems for adults

ISO/IEC 8859-1:1998
Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 1

ISO/IEC 8859-2:1999
Latin alphabet No. 2

ISO/IEC 8859-3:1999
Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 3

ISO/IEC 8859-4:1998
Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 4

ISO/IEC 8859-5:1999
Information technology. 8-bit single-byte coded graphic character sets. Latin/Cyrillic alphabet

ISO/IEC 8859-6:1999
Information technology. 8-bit single-byte coded graphic character sets. Latin/Arabic alphabet

ISO/IEC 8859-8:1999
Information technology. 8-bit single-byte coded graphic character sets. Latin/Hebrew alphabet

ISO/IEC 8859-9:1999
Latin alphabet No. 5

ISO/IEC 8859-10:1998
Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 6

ISO/IEC 8859-13:1998
Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 7

ISO/IEC 8859-14:1998
Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 8 (Celtic)

ISO/IEC 8859-15:1999
Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 9

ISO 8861:1998
Shipbuilding. Engine-room ventilation in diesel-engined ships. Design requirements and basis of calculations

ISO 8871:1997
Elastomeric parts for aqueous parenteral preparations

ISO 8872:2003
Aluminium caps for transfusion, infusion and injection bottles. General requirements and test methods

ISO/IEC 8878:1992
Information technology. Telecommunications and information exchange between systems. Use of X.25 to provide the OSI connection-mode network service

ISO/IEC 8882-1:1996
Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testing. General principles

ISO/IEC 8882-3:1991
Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testing. Packet layer conformance suite

ISO 8886:1996
Information technology. Open systems interconnection. Data link service definition

ISO 8891:2000
Dental casting alloys with noble metal content of at least 25% but less than 75%

ISO 8892:1995
Oilseed residues. Determination of total residual hexane

ISO 8893:1997
Forestry machinery. Portable brush cutters and grass trimmers. Engine performance and fuel consumption

ISO 8957:1996
Information and documentation. Hebrew alphabet coded character sets for bibliographic information interchange

ISO 8968-1:2002
Milk. Determination of nitrogen content. Kjeldahl method

ISO 8968-2:2002
Milk. Determination of nitrogen content. Block-digestion method (Macro method)

ISO 8968-4:2002
Milk. Determination of nitrogen content. Determination of non-protein nitrogen content

ISO 8968-5:2002
Milk. Determination of nitrogen content. Determination of protein-nitrogen content

ISO 8973:1999
Liquefied petroleum gases. Calculation method for density and vapour pressure

ISO 8974:2002
Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography

ISO 8975:1995
Plastics. Phenolic resins. Determination of pH

ISO 8977:2003
Tools for pressing. Matrixes

ISO 8980-1:1997
Ophthalmic optics. Uncut finished spectacle lenses. Specifications for single-vision and multifocal lenses

ISO 8980-2:1997
Ophthalmic optics. Uncut finished spectacle lenses. Specifications for progressive power lenses

ISO 8980-3:1999
Ophthalmic optics. Uncut finished spectacle lenses. Transmittance specifications and test methods

ISO 8980-4:2000
Ophthalmic optics. Uncut finished spectacle lenses. Specifications and test methods for anti-reflective coatings

ISO 8985:1998
Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content

ISO 8986-1:1999
Plastics. Polybutene (PB) moulding and extrusion materials. Designation system and basis for specifications

ISO 8986-2:1996
Plastics. Polybutene (PB) moulding and extrusion materials. Preparation of test specimens and determination of properties

ISO 8987:1998
Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate

ISO 8988:1997
Plastics. Phenolic resins. Determination of hexamethylenetetramine content. Kjeldahl method and perchloric acid method

ISO 8989:1998
Plastics. Liquid phenolic resins. Determination of water miscibility

ISO 8990:1996
Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot box

ISO 8995:2002
Lighting of indoor work places