|
ISO 10000 - 14997
ISO/IEC TR 10000-1:1995
Information technology. Framework and taxonomy of international standardized profiles. General principles and documentation framework
ISO/IEC TR 10000-2:1995
Information technology. Framework and taxonomy of international standardized profiles. Principles and taxonomy for OSI profiles
ISO/IEC TR 10000-3:1995
Information technology. Framework and taxonomy of international standardized profiles. Principles and taxonomy for open system environment profiles
ISO 10005:1995
Quality management. Guidelines for quality plans
ISO 10006:2003
Quality management systems. Guidelines for quality management in projects
ISO 10007:2003
Quality management systems. Guidelines for configuration management
ISO 10012:2003
Measurement management systems. Requirements for measurement processes and measuring equipment
ISO 10015:1999
Quality management. Guidelines for training
ISO/IEC 10021-1:1990
Information technology. Text communication. Message-oriented text interchange systems (MOTIS). System and service overview
ISO/IEC 10021-2:1990
Information technology. Message handling systems (MHS). Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Overall architecture
ISO/IEC 10021-2:1996
Information technology. Message handling systems (MHS). Overall architecture
ISO/IEC 10021-4:1990
Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Message transfer system: abstract service definition and procedures
ISO/IEC 10022:1996
Information technology. Open systems interconnection. Physical service definition
ISO/IEC 10025-2:1996
Information technology. Telecommunications and information exchange between systems. Transport conformance testing for connection-mode transport protocol operating over conection-mode network service. Abstract test suites and PIXIT for ISO/IEC 8073:1988 classes 0, 2 over CONS and 4 over CLNS
ISO/IEC 10025-3:1993
Information technology. Telecommunications and information exchange between systems. Transport conformance testing for connection-mode transport protocol operating over connection-mode network service. Transport test management protocol specification
ISO/IEC 10026-1:1998
Information technology. Open systems interconnection. Distributed transaction processing. OSI TP model
ISO/IEC 10026-2:1998
Information technology. Open systems interconnection. Distributed transaction processing. OSI TP service
ISO/IEC 10026-3:1998
Information technology. Open systems interconnection. Distributed transaction processing. Protocol specification
ISO/IEC 10026-4:1995
Information technology. Open systems interconnection. Distributed transaction processing. Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 10026-5:1998
Information technology. Open systems interconnection. Distributed transaction processing. Application context proforma and guidelines when using OSI TP
ISO/IEC 10026-6:1995
Information technology. Open systems interconnection. Distributed transaction processing. Unstructured data transfer
ISO/IEC 10027:1990
Information technology. Information Resource Dictionary System (IRDS) framework
ISO/IEC 10028:1993
Information technology. Telecommunications and information exchange between systems. Definition of the relaying functions of a network layer intermediate system
ISO/IEC 10030:1995
Information technology. Telecommunications and information exchange between systems. End System Routeing Information Exchange protocol for use in conjunction with ISO/IEC 8878
ISO/IEC TR 10034:1990
Guidelines for the preparation of conformity clauses in programming language standards
ISO/IEC 10035-2:1995
Information technology. Open systems interconnection. Connectionless protocol for the Association Control Service Element. Protocol implementation conformance (PICS) proforma
ISO/IEC 10036:1996
Information technology. Font information interchange. Procedures for registration of font-related identifiers
ISO/IEC TR 10037:1991
Information technology. SGML and Text-entry Systems. Guidelines for SGML Syntax-Directed Editing Systems
ISO/IEC 10040:1992
Information technology. Open systems interconnection. Systems management overview
ISO 10045:1991
Alpine skis. Binding mounting area. Requirements for test screws
ISO 10054:1998
Internal combustion compression-ignition engines. Measurement apparatus for smoke from engines operating under steady-state conditions. Filter type smokemeter
ISO 10056:2001
Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles
ISO 10058:1996
Magnesites and dolomites. Chemical analysis
ISO 10062:1995
Corrosion test in artificial atmospheres at very low concentrations of polluting gas(es)
ISO TR 10064-1:1992
Cylindrical gears. Code of inspection practice. Inspection of corresponding flanks of gear teeth
ISO TR 10064-2:1996
Cylindrical gears. Code of inspection practice. Inspection related to radial composite deviations, runout, tooth thickness and backlash
ISO TR 10064-3:1996
Cylindrical gears. Code of inspection practice. Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
ISO/TR 10064-4:1998
Cylindrical gears. Code of inspection practice. Recommendations relative to surface texture and tooth contact pattern checking
ISO 10066:1998
Flexible cellular polymeric materials. Determination of creep in compression
ISO 10071-1:2001
Tools for pressing. Ball-lock punches. Ball-lock punches for light duty
ISO 10075-1:2000
Ergonomic principles related to mental workload. General terms and definitions (ISO 10075:1991)
ISO 10075-2:2000
Ergonomic principles related to mental workload. Design principles
ISO 10077-1:2000
Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Simplified method
ISO 10079-1:2000
Medical suction equipment. Electrically powered suction equipment. Safety requirements
ISO 10079-2:2000
Medical suction equipment. Manually powered suction equipment
ISO 10079-3:2000
Medical suction equipment. Suction equipment powered from a vacuum or pressure source
ISO 10082:2000
Plastics. Phenolic resins. Classification and test methods
ISO 10087:1996
Small craft. Hull identification. Coding system
ISO 10088:2001
Small craft. Permanently installed fuel systems and fixed fuel tanks
ISO/IEC 10089:1991
Information technology. 130 mm rewritable optical disk cartridge for information interchange
ISO/IEC 10090:1992
Information technology. 90 mm optical disk cartridges, rewritable and read only, for data interchange
ISO/IEC TR 10091:1995
Information technology. Technical aspects of 130 mm optical disk cartridge write-once recording format
ISO 10093:1999
Plastics. Fire tests. Standard ignition sources
ISO 10099:2001
Pneumatic fluid power. Cylinders. Final examination and acceptance criteria
ISO 10100:2001
Hydraulic fluid power. Cylinders. Acceptance tests
ISO 10101-1:1998
Natural gas. Determination of water by the Karl Fischer method. Introduction
ISO 10101-2:1998
Natural gas. Determination of water by the Karl Fischer method. Titration procedure
ISO 10101-3:1998
Natural gas. Determination of water by the Karl Fischer method. Coulometric procedure
ISO 10102:2001
Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Length of wrenches and thickness of the heads
ISO 10103:2001
Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Length of wrenches and thickness of the heads
ISO 10104:2001
Assembly tools for screws and nuts. Double-headed, deep offset and modified offset, box wrenches. Length of wrenches and thickness of the heads
ISO 10109-1:1994
Optics and optical instruments. Environmental requirements. General information, definitions, climatic zones and their parameters
ISO 10109-4:2001
Optics and optical instruments. Environmental requirements. Test requirements for telescopic systems
ISO 10109-6:1994
Optics and optical instruments. Environmental requirements. Test requirements for medical optical devices
ISO 10109-7:2001
Optics and optical instruments. Environmental requirements. Test requirements for optical measuring instruments
ISO 10109-8:1994
Optics and optical instruments. Environmental requirements. Test requirements for extreme conditions of use
ISO 10109-11:2001
Optics and optical instruments. Environmental requirements. Optical instruments for outdoor conditions of use
ISO 10110-1:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. General
ISO 10110-2:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. Material imperfections. Stress birefringence
ISO 10110-3:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. Material imperfections. Bubbles and inclusions
ISO 10110-4:1997
Optics and optical instruments. Preparation of drawings for optical elements and systems. Material imperfections. Inhomogeneity and striae
ISO 10110-5:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface form tolerances
ISO 10110-6:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. Centring tolerances
ISO 10110-7:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface imperfection tolerances
ISO 10110-8:1997
Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface texture
ISO 10110-9:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface treatment and coating
ISO 10110-10:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. Table representing data of a lens element
ISO 10110-11:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems. Non-toleranced data
ISO 10110-12:1997
Optics and optical instruments. Preparation of drawings for optical elements and systems. Aspheric surfaces
ISO 10110-13:1997
Optics and optical instruments. Preparation of drawings for optical elements and systems. Laser irradiation damage threshold
ISO 10110-14:2003
Optics and optical instruments. Preparation of drawings for optical elements and systems. Wavefront deformation tolerance
ISO 10111:2002
Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
ISO/IEC 10116:1997
Information technology. Security techniques. Modes of operation for an $in-bit block cipher
ISO/IEC 10118-1:1994
Information technology.Security techniques.Hash-functions. General
ISO/IEC 10118-2:1994
Information technology.Security techniques.Hash-functions. Hash-functions using an N-bit block cipher algorithm
ISO/IEC 10118-3:2003
Information technology. Security techniques. Hash-functions. Dedicated hash-functions
ISO/IEC 10118-4:1998
Information technology. Security techniques. Hash-functions. Hash-functions using modular arithmetic
ISO 10119:2002
Carbon fibre. Determination of density
ISO 10126-1:1991
Banking. Procedures for message encipherment (wholesale). General principles
ISO 10126-2:1991
Banking. Procedures for message encipherment (wholesale). DEA algorithm
ISO 10133:2001
Small craft. Electrical systems. Extra-low-voltage d.c. installations
ISO 10135:1994
Technical drawings. Simplified representation of moulded, cast and forged parts
ISO 10139-2:2001
Dentistry. Soft lining materials for removable dentures. Materials for long-term use
ISO/IEC 10149:1989
Information technology. Data interchange on read-only 120 mm optical data disks (CD-ROM)
ISO 10154:1991
Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end
ISO 10155:1995
Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
ISO/IEC 10168-1:1997
Information technology. Open systems interconnection. Conformance test suite for the session protocol. Test suite structure and test purposes
ISO/IEC 10168-4:1996
Information technology. Open systems interconnection. Conformance test suite for the session protocol. Test management protocol specification
ISO/IEC 10169-1:1991
Information technology. Open systems interconnection. Conformance test suite for the ACSE protocol. Test suite structure and test purposes
ISO/IEC 10170-1:1993
Information technology. Open systems interconnection. Conformance test suite for the FTAM protocol. Test suite structure and test purposes
ISO/IEC TR 10171:1994
Information technology. Telecommunications and information exchange between systems. List of standard data link layer protocols that utilize High-Level Data Link Control (HDLC) classes of procedures and list of standardized XID format identifiers and private parameter set identification values
ISO/IEC TR 10172:1991
Information technology. Telecommunications and information exchange between systems. Network Transport Protocol interworking specification
ISO/IEC 10173:1998
Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T
ISO/IEC 10177:1993
Information technology. Telecommunications and information exchange between systems. Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol
ISO/IEC 10181-1:1996
Information technology. Open systems interconnection. Security frameworks for open systems. Overview
ISO/IEC 10181-2:1996
Information technology. Open systems interconnection. Security frameworks for open systems. Authentication framework
ISO/IEC 10181-3:1996
Information technology. Open systems interconnection. Security frameworks for open systems. Access control framework
ISO/IEC 10181-4:1997
Information technology. Open systems interconnection. Security frameworks for open systems. Non-repudiation framework
ISO/IEC 10181-5:1996
Information technology. Open systems interconnection. Security frameworks for open systems. Confidentiality framework
ISO/IEC 10181-6:1996
Information technology. Open systems interconnection. Security frameworks for open systems. Integrity framework
ISO/IEC 10181-7:1996
Information technology. Open systems interconnection. Security frameworks for open systems. Security audit and alarms framework
ISO/IEC TR 10182:1993
Information technology. Programming languages, their environments and system software interfaces. Guidelines for language bindings
ISO TR 10193:1989
Round general use light gauge metal containers. Nominal filling volumes and nominal diameters
ISO TR 10194:1989
Non-round general use light gauge metal containers. Nominal filling volumes and nominal cross-sections
ISO 10197:1993
Micrographics. Reader-printers for transparent microforms. Characteristics
ISO 10198:1994
Micrographics. Rotary camera for 16 mm microfilm. Mechanical and optical characteristics
ISO 10202-2:1996
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Transaction process
ISO 10202-5:1998
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Use of algorithms
ISO 10202-7:1998
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Key management
ISO 10202-8:1998
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. General principles and overview
ISO/IEC 10206:1991
Information technology. Programming languages. Extended Pascal
ISO 10209-1:1992
Technical product documentation. Vocabulary. Terms relating to technical drawings: General and types of drawings
ISO 10209-2:1996
Technical product documentation. Vocabulary. Terms relating to projection methods
ISO 10211-1:1996
Thermal bridges in building construction. Heat flows and surface temperatures. General calculation methods
ISO 10211-2:2001
Thermal bridges in building construction. Heat flows and surface temperatures. Linear thermal bridges
ISO 10223:1992
Textile machinery. Flat warp knitting machines. Numbering of guide bars
ISO 10227:1996
Human/human surrogate impact (single shock) testing and evaluation. Guidance on technical aspects
ISO 10228:1991
Cross-country skis. Binding mounting area. Requirements for test screws
ISO 10231:2003
Motorcycle tyres. Test methods for verifying tyre capabilities
ISO TR 10232:1989
General-purpose flat pallets for through transit of goods. Design rating and maximum working load
ISO TR 10233:1989
General purpose flat pallets for through transit of goods. Performance requirements
ISO 10239:2000
Small craft. Liquified petroleum gas (LPG) systems
ISO 10240:1996
Small craft. Owner's manual
ISO 10242-1:1998
Tools for pressing. Punch holder shanks. Type A
ISO 10248:2000
Fluid fertilizers. De-aeration of suspension samples by film disentrainment
ISO 10249:2000
Fluid fertilizers. Preliminary visual examination and preparation of samples for physical testing
ISO 10253:1998
Water quality. Marine algal growth inhibition test with $7ISkeletonema costatum$7R and $7IPhaeodactylum tricornutum$7R
ISO 10270:1995
Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISO 10271:2001
Dental metallic materials. Corrosion test methods
ISO 10273:2003
Microbiology of food and animal feeding stuffs. Horizontal method for the detection of presumptive pathogenic $7IYersinia enterocolitica$7R
ISO/IEC 10279:1991
Information technology. Programming languages. Full BASIC
ISO 10280:1995
Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method
ISO 10289:2001
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests
ISO 10290:1993
Textiles. Cotton yarns. Specifications
ISO 10294-1:1996
Fire-resistance tests. Fire dampers for air distribution systems. Test method
ISO 10294-2:1999
Fire-resistance tests. Fire dampers for air distribution systems. Classification, criteria and field of application of test results
ISO 10294-3:1999
Fire-resistance tests. Fire dampers for air distribution systems. Guidance on the test method
ISO 10294-4:2001
Fire-resistance tests. Fire dampers for air distribution systems. Test of thermal release mechanism
ISO 10299:2000
Aerospace. Rivets, solid. Material and metric series identification
ISO 10300-1:2001
Calculation of load capacity of bevel gears. Calculation of load capacity of bevel gears. Introduction and general influence factors
ISO 10300-2:2001
Calculation of load capacity of bevel gears. Calculation of surface durability (pitting)
ISO 10300-3:2001
Calculation of load capacity of bevel gears. Calculation of tooth root strength
ISO 10301:1997
Water quality. Determination of highly volatile halogenated hydrocarbons. Gas-chromatographic methods
ISO 10303-1:1994
Industrial automation systems and integration. Product data representation and exchange. Overview and fundamental principles
ISO 10303-11:1994
Industrial automation systems and integration. Product data representation and exchange. Description methods: the EXPRESS language reference manual
ISO/TR 10303-12:1997
Industrial automation systems and integration. Product data representation and exchange. Description methods. The EXPRESS-I language reference manual
ISO 10303-21:1994
Industrial automation systems and integration. Product data representation and exchange. Implementation methods. Clear text encoding of the exchange structure
ISO 10303-22:1998
Industrial automation systems and integration. Product data representation and exchange. Implementation methods. Standard data access interface
ISO 10303-31:1994
Industrial automation systems and integration. Product data representation and exchange. Conformance testing methodology and framework: general concepts
ISO 10303-32:1998
Industrial automation systems and integration. Product data representation and exchange. Conformance testing methodology and framework: Requirements on testing laboratories and clients
ISO 10303-41:1994
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources. Fundamentals of product description and support
ISO 10303-42:1994
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources. Geometric and topological representation
ISO 10303-43:1994
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: Representation structures
ISO 10303-44:1994
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: Product structure configuration
ISO 10303-45:1998
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resource: Materials
ISO 10303-46:1994
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: visual presentation
ISO 10303-47:1997
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resource. Shape variation tolerances
ISO 10303-49:1998
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: Process structure and properties
ISO 10303-101:1994
Industrial automation systems and integration. Product data representation and exchange. Integrated application resources: Draughting
ISO 10303-201:1994
Industrial automation systems and integration. Product data representation and exchange. Application protocol: Explicit draughting
ISO 10303-203:1994
Industrial automation systems and integration. Product data representation and exchange. Application protocol. Configuration controlled design
ISO 10303-210:2002
Industrial automation systems and integration. Product data representation and exchange. Application protocol. Electronic assembly, interconnection, and packaging design
ISO 10304-1:1995
Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions. Method for water with low contamination
ISO 10304-2:1997
Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
ISO 10304-3:1997
Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
ISO 10304-4:2000
Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of dissolved chlorate, chloride and chlorite in water with low contamination
ISO 10306:1995
Textiles. Cotton fibres. Evaluation of maturity by the air flow method
ISO 10308:1997
Metallic coatings. Review of porosity tests
ISO 10312:1995
Ambient air. Determination of asbestos fibres. Direct-transfer transmission electron microscopy method
ISO 10319:1996
Geotextiles. Wide-width tensile test
ISO 10320:1999
Geotextiles and geotextile-related products. Identification on site
ISO 10321:1996
Geotextiles. Tensile test for joints/seams by wide-width method
ISO 10322-1:1997
Ophthalmic optics. Semi-finished spectacle lens blanks. Specifications for single-vision and multifocal lens blanks
ISO 10322-2:1997
Ophthalmic optics. Semi-finished spectacle lens blanks. Specifications for progressive power lens blanks
ISO 10323:1996
Dental rotary instruments. Bore diameters for discs and wheels
ISO 10326-2:2001
Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Application to railway vehicles
ISO 10328-1:1996
Prosthetics.Structural testing of lower-limb prostheses. Test configurations
ISO 10328-2:1996
Prosthetics.Structural testing of lower-limb prostheses. Test samples
ISO 10328-3:1996
Prosthetics.Structural testing of lower-limb prostheses. Principal structural tests
ISO 10328-4:1996
Prosthetics.Structural testing of lower-limb prostheses. Loading parameters of principal structural tests
ISO 10328-5:1996
Prosthetics.Structural testing of lower-limb prostheses. Supplementary structural tests
ISO 10328-6:1996
Prosthetics.Structural testing of lower-limb prostheses. Loading parameters of supplementary structural tests
ISO 10328-7:1996
Prosthetics.Structural testing of lower-limb prostheses. Test submission document
ISO 10328-8:1996
Prosthetics.Structural testing of lower-limb prostheses. Test report
ISO 10330:2002
Photography. Synchronizers, ignition circuits and connectors for cameras and photoflash units. Electrical characteristics and test methods
ISO 10338:1998
Optics and optical instruments. Contact lenses. Determination of curvature
ISO 10339:1999
Ophthalmic optics. Contact lenses. Determination of water content of hydrogel lenses
ISO 10340:1997
Optics and optical instruments. Contact lenses. Method for determination of solvent extractable substances
ISO 10341:1999
Ophthalmic instruments. Refractor heads
ISO 10342:2003
Ophthalmic instruments. Eye refractometers
ISO 10343:1999
Ophthalmic instruments. Ophthalmometers
ISO 10344:1998
Optics and optical instruments. Contact lenses. Saline solution for contact lens testing
ISO 10347:1999
Worm gears. Geometry of worms. Name plates for worm gear units, centre distances, information to be supplied to gear manufacturer by the purchaser
ISO 10348:1993
Photography. Processing wastes. Determination of silver content
ISO 10349-1:2002
Photography. Photographic-grade chemicals. Test methods. General
ISO 10349-8:2002
Photography. Photographic-grade chemicals. Test methods. Determination of volatile matter
ISO 10349-13:2002
Photography. Photographic-grade chemicals. Test methods. Determination of pH
ISO 10350-1:2001
Plastics. Acquisition and presentation of comparable single-point data. Moulding materials
ISO 10350-2:2001
Plastics. Acquisition and presentation of comparable single-point data. Long-fibre-reinforced plastic
ISO 10352:1997
Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
ISO 10356:1996
Cinematography. Storage and handling of nitrate-base motion-picture films
ISO 10360-1:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Vocabulary
ISO 10360-2:2002
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used for measuring size
ISO 10360-3:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs with the axis of the rotary table as the fourth axis
ISO 10360-4:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used in scanning measuring mode
ISO 10360-5:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using multiple stylus probing systems
ISO 10360-6:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Estimation of errors in computing Gaussian associated features
ISO 10361:2000
Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers
ISO 10363:1995
Hot-melt adhesives. Determination of thermal stability
ISO 10365:1995
Adhesives. Designation of main failure patterns
ISO 10366-1:2002
Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials. Designation system and basis for specifications
ISO 10366-2:1999
Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO/IEC 10367:1991
Information technology. Standardized coded graphic character sets for use in 8-bit codes
ISO 10368:1992
Freight thermal containers. Remote condition monitoring
ISO 10370:1996
Petroleum products. Determination of carbon residue. Micro method
ISO 10371:1993
Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification
ISO 10372:1992
Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces
ISO/IEC 10373-1:1998
Identification cards. Test methods. General characteristics tests
ISO/IEC 10373-2:1998
Identification cards. Test methods. Cards with magnetic stripes
ISO/IEC 10373-3:2001
Identification cards. Test methods. Integrated circuit(s) cards with contacts and related interface devices
ISO/IEC 10373-5:1998
Identification cards. Test methods. Optical memory cards
ISO/IEC 10373-6:2001
Identification cards. Test methods. Proximity cards
ISO/IEC 10373-7:2001
Identification cards. Test methods. Vicinity cards
ISO 10374:1998
Freight containers. Automatic identification
ISO 10380:2003
Pipework. Corrugated metal hoses and hose assemblies
ISO 10381-1:2002
Soil quality. Sampling. Guidance on the design of sampling programmes
ISO 10381-2:2002
Soil quality. Sampling. Guidance on sampling techniques
ISO 10381-3:2001
Soil quality. Sampling. Guidance on safety
ISO 10405:2000
Petroleum and natural gas industries. Care and use of casing and tubing
ISO 10414-1:2001
Petroleum and natural gas industries. Field testing of drilling fluids. Water-based fluids
ISO 10414-2:2002
Petroleum and natural gas industries. Field testing of drilling fluids. Oil-based fluids
ISO 10416:2002
Petroleum and natural gas industries. Drilling fluids. Laboratory testing
ISO 10423:2001
Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
ISO 10425:2003
Steel wire ropes for the petroleum and natural gas industries. Minimum requirements and terms of acceptance
ISO 10426-1:2000
Petroleum and natural gas industries. Cements and materials for well cementing. Specification
ISO 10426-3:2003
Petroleum and natural gas industries. Cements and materials for well cementing. Testing of deepwater well cement formulations
ISO 10427-1:2002
Petroleum and natural gas industries. Casing centralizers. Bow-spring casing centralizers
ISO 10432:2000
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
ISO 10437:2003
Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
ISO 10439:2002
Petroleum, chemical and gas service industries. Centrifugal compressors
ISO 10440-1:2001
Petroleum and natural gas industries. Rotary-type positive-displacement compressors. Process compressors (oil-free)
ISO 10440-2:2001
Petroleum and natural gas industries. Rotary-type positive-displacement compressors. Packaged air compressors (oil-free)
ISO 10441:1999
Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. Special purpose applications
ISO 10442:2002
Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors
ISO 10451:2002
Dental implant systems. Contents of technical file
ISO 10456:2000
Building materials and products. Procedures for determining declared and design thermal values
ISO 10457:2002
Textile machinery. Dyeing and finishing machines. Nominal speeds
ISO 10458:1993
Textile machinery. Square bars for winding devices relating to dyeing and finishing machines. Dimensions
ISO 10459:1992
Textile machinery. Dyeing and finishing machines. Designation of operating ranges of component parts
ISO 10472-1:1998
Safety requirements for industrial laundry machinery. Common requirements
ISO 10472-2:1998
Safety requirements for industrial laundry machinery. Washing machines and washer-extractors
ISO 10472-3:1998
Safety requirements for industrial laundry machinery. Washing tunnel lines including component machines
ISO 10472-4:1998
Safety requirements for industrial laundry machinery. Air dryers
ISO 10472-5:1998
Safety requirements for industrial laundry machinery. Flatwork ironers, feeders and folders
ISO 10472-6:1998
Safety requirements for industrial laundry machinery. Ironing and fusing presses
ISO 10477:1996
Dentistry. Polymer-based crown and bridge materials
ISO 10484:1997
Widening test on nuts
ISO TR 10495:1997
Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336
ISO 10504:2000
Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography
ISO 10510:2000
Tapping screw and washer assemblies with plain washers
ISO 10511:1998
Prevailing torque type hexagon thin nuts (with non-metallic insert)
ISO 10512:1998
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread. Property classes 6, 8 and 10
ISO 10513:1998
Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread. Property classes 8, 10 and 12
ISO/IEC 10514-1:1996
Information technology. Programming languages. Modula-2, base language
ISO/IEC 10514-2:1998
Information technology. Programming languages. Modula-2, generics in Modula-2
ISO/IEC 10514-3:1998
Information technology. Programming languages. Modula-2, object-oriented Modula-2
ISO 10519:2001
Rapeseed. Determination of chlorophyll content. Spectrometric method
ISO 10520:1998
Native starch. Determination of starch content. Ewers polarimetric method
ISO 10525:1997
Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above. Additional stability tests
ISO 10526:1999
CIE standard illuminants for colorimetry
ISO/CIE 10527:1991
CIE standard colorimetric observers
ISO 10528:1995
Textiles. Commercial laundering procedure for textile fabrics prior to flammability testing
ISO 10531:1992
Packaging. Complete, filled transport packages. Stability testing of unit loads
ISO 10534-1:2001
Acoustics. Determination of sound absorption coefficient and impedance in impedances tubes. Method using standing wave ratio
ISO 10534-2:2001
Acoustics. Determination of sound absorption coefficient and impedance in impedance tubes. Transfer-function method
ISO 10535:1998
Hoists for the transfer of disabled persons. Requirements and test methods
ISO/IEC 10536-1:2000
Identification cards. Contactless integrated circuit(s) cards. Close-coupled cards. Physical characteristics
ISO/IEC 10538:1991
Information technology. Control functions for text communication
ISO 10539:2002
Animal and vegetable fats and oils. Determination of alkalinity
ISO 10540-1:2003
Animal and vegetable fats and oils. Determination of phosphorus content. Colorimetric method
ISO 10540-2:2003
Animal and vegetable fats and oils. Determination of phosphorus content. Method using graphite furnace atomic absorption spectrometry
ISO 10540-3:2002
Animal and vegetable fats and oils. Determination of phosphorus content. Method using inductively coupled plasma (ICP) optical emission spectroscopy
ISO 10542-1:2001
Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Requirements and test methods for all systems
ISO 10542-2:2001
Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Four-point strap-type tiedown systems
ISO 10545-1:1997
Ceramic tiles. Sampling and basis for acceptance
ISO 10545-2:1997
Ceramic tiles. Determination of dimensions and surface quality
ISO 10545-3:1997
Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
ISO 10545-4:1997
Ceramic tiles. Determination of modulus of rupture and breaking strength
ISO 10545-5:1998
Ceramic tiles. Determination of impact resistance by measurement of coefficient of restitution
ISO 10545-6:1997
Ceramic tiles. Determination of resistance to deep abrasion for unglazed tiles
ISO 10545-7:1999
Ceramic tiles. Determination of resistance to surface abrasion for glazed tiles
ISO 10545-8:1996
Ceramic tiles. Determination of linear thermal expansion
ISO 10545-9:1996
Ceramic tiles. Determination of resistance to thermal shock
ISO 10545-10:1997
Ceramic tiles. Determination of moisture expansion
ISO 10545-11:1996
Ceramic tiles. Determination of crazing resistance for glazed tiles
ISO 10545-12:1997
Ceramic tiles. Determination of frost resistance
ISO 10545-13:1997
Ceramic tiles. Determination of chemical resistance
ISO 10545-14:1997
Ceramic tiles. Determination of resistance to stains
ISO 10545-15:1997
Ceramic tiles. Determination of lead and cadmium given off by glazed tiles
ISO 10545-16:2000
Ceramic tiles. Determination of small colour differences
ISO 10548:2003
Carbon fibre. Determination of size content
ISO 10550:1994
Micrographics. Planetary camera systems. Test target for checking performance
ISO 10551:2001
Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales
ISO 10553:2003
Horology. Procedure for evaluating the accuracy of quartz watches
ISO 10555-1:1997
Sterile, single-use intravascular catheters. General requirements
ISO 10555-2:1997
Sterile, single-use intravascular catheters. Angiographic catheters
ISO 10555-3:1997
Sterile, single-use intravascular catheters. Central venous catheters
ISO 10555-4:1997
Sterile, single-use intravascular catheters. Balloon dilatation catheters
ISO 10555-5:1997
Sterile, single-use intravascular catheters. Over-needle peripheral catheters
ISO 10563:1998
Building construction. Sealants for joints. Determination of change in mass and volume
ISO 10564:1997
Soldering and brazing materials. Methods for the sampling of soft solders for analysis
ISO 10565:1998
Oilseeds. Simultaneous determination of oil and water contents. Methods using pulsed nuclear magnetic resonance spectrometry
ISO 10578:1992
Technical drawings. Tolerancing of orientation and location. Projected tolerance zone
ISO 10579:1993
Technical drawings. Dimensioning and tolerancing. Non-rigid parts
ISO 10585:1996
Information and documentation. Armenian alphabet coded character set for bibliographic information interchange
ISO 10586:1996
Information and documentation. Georgian alphabet coded character set for bibliographic information interchange
ISO 10587:2000
Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method
ISO/IEC 10588:1993
Information technology. Use of X.25 packet layer protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode network service
ISO 10590:1998
Building construction. Sealants. Determination of adhesion/cohesion properties at maintained extension after immersion in water
ISO 10591:1998
Building construction. Sealants. Determination of adhesion/cohesion properties after immersion in water
ISO 10592:1995
Small craft. Hydraulic steering systems
ISO 10594:1997
Micrographics. Rotary camera systems. Test target for checking performance
ISP 10607-2:1997
Information technology. International standardized profiles AFTnn. File transfer, access and management. Definition of document types, constraint sets and syntaxes
ISP 10607-3:1997
Information technology. International standardized profiles AFTnn. File transfer, access and management. AFT11. Simple file transfer service (unstructured) (regional variant of ISO/IEC ISP 10607-3:1995)
ISP 10607-4:1997
Information technology. International standardized profiles AFTnn. File transfer, access and management. AFT12. Positional file transfer service (flat) (regional variant of ISO/IEC ISP 10607-4:1995)
ISP 10607-5:1997
Information technology. International standardized profiles AFTnn. File transfer, access and management. AFT22. Positional file access service (flat) (regional variant of ISO/IEC ISP 10607-5:1995)
ISP 10607-6:1997
Information technology. International standardized profiles AFTnn. File transfer, access and management. AFT3. File management service
ISP 10608-2:1995
Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service. TA51 profile including subnetwork-dependent requirements for CSMA/CD Local area networks (LANs)
ISP 10608-4:1997
Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service. Definition of profile TA53, operation over a token ring LAN subnetwork
ISO/IEC ISP 10608-5:1992
Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service. TA1111/TA1121 profiles including subnetwork-dependent requirements for X.25 packet-switched data networks using virtual calls
ISP 10608-6:1997
Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service. Definition of profile TA54, operation over an FDDI LAN subnetwork
ISP 10608-13:1997
Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service. MAC sublayer and physical layer dependent requirements for a token ring LAN subnetwork
ISO/IEC ISP 10608-14:1995
Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service. MAC, PHY and PMD sublayer dependent and Station Management requirements over an FDDI LAN subnetwork
ISO/IEC ISP 10609-1:1992
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Subnetwork-type independent requirements for Group TB
ISP 10609-2:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Subnetwork-type independent requirements for group TC
ISP 10609-3:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Subnetwork-type independent requirements for group TD
ISP 10609-4:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Subnetwork-type independent requirements for group TE
ISO/IEC ISP 10609-5:1992
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Definition of profiles TB1111/TB1121
ISP 10609-6:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Definition of profiles TC1111/TC1121
ISP 10609-7:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Definition of profiles TD1111/TD1121
ISP 10609-8:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Definition of profiles TE1111/TE1121
ISP 10609-10:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. LAN subnetwork-dependent, media-independent requirements
ISP 10609-11:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. CSMA/CD subnetwork-dependent, media-dependent requirements
ISP 10609-12:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Definition of profile TC51, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a CSMA/CD LAN
ISP 10609-14:1997
Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Definition of profile TC53, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a token ring LAN
ISP 10610-1:1995
Information technology. International standardized profile FOD11. Open document format: simple document structure. Character content architecture only. Document Application Profile (DAP)
ISP 10612-1:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. Subnetwork-independent requirements
ISP 10612-2:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. CSMA/CD LAN subnetwork-dependent, media-dependent requirements
ISP 10612-3:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. Token ring LAN subnetwork-dependent, media-dependent requirements
ISP 10612-4:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. Profile RD51.51 (CSMA/CD LAN - CSMA/CD LAN)
ISP 10612-5:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. Profile RD51.54 (CSMA/CD LAN - FDDI LAN)
ISP 10612-6:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. Profile RD54.54 (FDDI LAN - FDDI LAN)
ISP 10612-7:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. Profile RD51.53 (CSMA/CD LAN - token ring LAN)
ISP 10612-8:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. Profile RD53.53 (token ring LAN - token ring LAN)
ISP 10612-9:1997
Information technology. International standardized profile RD. Relaying the MAC service using transparent bridging. Profile RD53.54 (token ring LAN - FDDI LAN)
ISP 10613-2:1997
Information technology. International standardized profile RA. Relaying the connectionless-mode network service. LAN subnetwork-dependent, media independent requirements
ISP 10613-3:1997
Information technology. International standardized profile RA. Relaying the connectionless-mode network service. CSMA/CD LAN subnetwork-dependent, media-dependent requirements
ISP 10613-4:1997
Information technology. International standardized profile RA. Relaying the connectionless-mode network service. FDDI LAN subnetwork-dependent, media-dependent requirements
ISP 10613-5:1997
Information technology. International standardized profile RA. Relaying the connectionless-mode network service. Definition of profile RA51.51, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks
ISP 10613-6:1997
Information technology. International standardized profile RA. Relaying the connectionless-mode network service. Definition of profile RA51.54, relaying the connectionless-mode network service between CSMA/CD LAN subnetwork and FDDI LAN subnetworks
ISP 10613-8:1997
Information technology. International standardized profile RA. Relaying the connectionless-mode network service. Definition of profile RA51.1111, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access
ISP 10613-9:1997
Information technology. International standardized profile RA. Relaying the connectionless-mode network service. Definition of profile RA51.1121, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access
ISO/IEC ISP 10615-3:1996
Information technology. International standardized profiles ADInn. OSI directory. ADI21. DSA performer role
ISO/IEC ISP 10615-4:1996
Information technology. International standardized profiles ADInn. OSI directory. ADI22. DSA invoker role
ISO/IEC ISP 10616:1995
Information technology. International standardized profile FDI11. Directory data definitions. Common directory use (Normal)
ISO 10618:2000
Carbon fibre. Determination of tensile properties of resin-impregnated yarns
ISO 10627-2:1996
Hydraulic agricultural sprayers. Data sheets. Technical specifications related to components
ISO 10628:2001
Flow diagrams for process plants. General rules
ISO 10634:1996
Water quality. Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium
ISO 10635:1999
Refractory products. Methods of test for ceramic fibre products.
ISO 10636:1994
Photography. Processing chemicals. Specification for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate
ISO 10637:2000
Dental equipment. High and medium volume suction systems
ISO/IEC 10641:1993
Information technology. Computer graphics and image processing. Conformance testing of implementations of graphics standards
ISO 10642:1998
Hexagon socket countersunk head screws
ISO 10644:1998
Screw and washer assemblies with plain washers. Washer hardness classes 200 HV and 300 HV
ISO 10651-4:2002
Lung ventilators. Particular requirements for operator-powered resuscitators
ISO 10653:1993
Light-gauge metal containers. Round open-top cans. Cans defined by their nominal gross lidded capacities
ISO 10654:1993
Light gauge metal containers. Round open-top cans. Cans for liquid products with added gas, defined by their nominal filling volumes
ISO 10658:1996
Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices. Additional stability test
ISO 10663:1999
Hexagon nuts with flange. Fine pitch thread
ISO 10664:1999
Hexalobular internal driving feature for bolts and screws
ISO 10666:1999
Drilling screws with tapping screw threads. Mechanical and functional properties
ISO 10669:1999
Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A
ISO 10673:1999
Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
ISO 10683:2000
Fasteners. Non-electrolytically applied zinc flake coatings
ISO 10692-1:2001
Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Outlet connections
ISO 10692-2:2001
Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Specification and type testing for valve to cylinder connections
ISO 10695:2000
Water quality. Determination of selected organic nitrogen and phosphorus compounds. Gas chromatographic methods
ISO 10700:1995
Steel and iron. Determination of manganese content. Flame atomic absorption spectrometric method
ISO 10705-1:2001
Water quality. Detection and enumeration of bacteriophages. Detection and enumeration of bacteriophages. Enumeration of F-specific RNA bacteriophages
ISO 10705-2:2001
Water quality. Detection and enumeration of bacteriophages. Enumeration of somatic coliphages
ISO 10707:1998
Water quality. Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds. Method by analysis of biochemical oxygen demand (closed bottle test)
ISO 10712:1996
Water quality. $7IPseudomonas putida$7R growth inhibition test ($7IPseudomonas$7R cell multiplication inhibition test)
ISO 10713:1992
Jewellery. Gold alloy coatings
ISO 10714:2002
Steel and iron. Determination of phosphorus content. Phosphovanadomolybdate spectrophotometric method
ISO 10715:2001
Natural gas. Sampling guidelines
ISO 10716:1994
Paper and board. Determination of alkali reserve
ISO 10718:2002
Cork stoppers. Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium
DD ENV ISO 10722-1:1998
Geotextiles and geotextile-related products. Procedure for simulating damage during installation. Installation in granular materials
ISO 10723:2002
Natural gas. Performance evaluation for on-line analytical systems
ISO 10724-1:2001
Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
ISO 10724-2:2001
Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
ISO 10725:2000
Acceptance sampling plans and procedures for the inspection of bulk materials
ISO 10727:2002
Tea and instant tea in solid form. Determination of caffeine content. Method using high-performance liquid chromatography
ISO/IEC 10728:1993
Information technology. Information Resource Dictionary System (IRDS) Services Interface
ISO/IEC 10729-1:1993
Information technology. Open Systems Interconnection. Conformance test suite for the presentation layer. Test suite structure and test purposes for the presentation protocol
ISO/IEC 10729-2:1995
Information technology. Open Systems Interconnection. Conformance test suite for the presentation layer. Test suite structure and test purposes for the ASN.1 basic encodings
ISO/IEC TR 10730:1993
Information technology. Open systems interconnection. Tutorial on naming and addressing
ISO/IEC 10731:1994
Information technology. Open systems interconnection. Basic reference model. Conventions for the definition of OSI services
ISO/IEC 10732:1993
Information technology. Use of X.25 packet layer protocol to provide the OSI connection-mode network service over the telephone network
ISO/IEC 10733:1998
Information technology. Elements of management information related to the OSI network layer
ISO/IEC 10736:1995
Information technology. Telecommunications and information exchange between systems. Transport layer security protocol
ISO/IEC 10737:1998
Information technology. Elements of management information related to the OSI Transport layer
ISO/IEC 10739-1:1994
Information technology. Open Systems Interconnection. Test suite structure and test purposes
ISO/IEC 10744:1997
Information technology. Hypermedia/time-based structuring language (HyTime)
ISO/IEC 10745:1995
Information technology. Open systems interconnection. Upper layers security model
ISO/IEC 10746-1:1998
Information technology. Open distributed processing. Reference model. Overview
ISO/IEC 10746-2:1996
Information technology. Open distributed processing. Reference model. Foundations
ISO/IEC 10746-3:1996
Information technology. Open distributed processing. Reference model. Architecture
ISO 10754:1996
Information and documentation. Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
ISO 10756:1994
Graphic technology. Prepress digital data exchange. Colour line art data on magnetic tape
ISO 10758:1994
Graphic technology. Prepress digital data exchange. Online transfer from electronic prepress systems to colour hardcopy devices
ISO 10759:1994
Graphic technology. Prepress digital data exchange. Monochrome image data on magnetic tape
ISO 10762:1997
Hydraulic fluid power. Cylinder mounting dimensions. 10 MPa (100 bar) series
ISO 10766:1996
Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
ISO 10767-1:1996
Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Precision method for pumps
ISO 10767-2:1999
Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Simplified method for pumps
ISO 10767-3:1999
Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Method for motors
ISO 10770-1:1998
Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for four-way directional flow control valves
ISO 10770-2:1998
Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-way directional flow control valves
ISO 10771-1:2002
Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
ISO 10775:1995
Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method
ISO/IEC 10777:1991
Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format
ISO 10790:1999
Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
ISO 10791-1:1998
Test conditions for machining centres. Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
ISO 10791-2:2001
Test conditions for machining centres. Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
ISO 10791-3:1998
Test conditions for machining centres. Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
ISO 10791-4:1998
Test conditions for machining centres. Accuracy and repeatability of positioning of linear and rotary axes
ISO 10791-5:1998
Test conditions for machining centres. Accuracy and repeatability of positioning of work-holding pallets
ISO 10791-6:1998
Test conditions for machining centres. Accuracy of feeds, speeds and interpolations
ISO 10791-7:1998
Test conditions for machining centres. Accuracy of a finished test piece
ISO 10791-8:2001
Test conditions for machining centres. Evaluation of contouring performance in the three coordinate planes
ISO 10791-9:2001
Test conditions for machining centres. Evaluation of the operating times of tool change and pallet change
ISO 10792-1:1995
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Metric series
ISO 10792-2:1995
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Inch series
ISO 10792-3:1995
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Technical specification
ISO 10807:1997
Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere
ISO 10814:1996
Mechanical vibration. Susceptibility and sensitivity of machines to unbalance
ISO 10815:1996
Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
ISO 10816-2:2001
Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
ISO 10816-5:2001
Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Machine sets in hydraulic power and pumping plants
ISO 10817-1:1999
Rotating shaft vibration measuring systems. Relative and absolute sensing of radial vibration
ISO 10819:1997
Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
ISO 10823:1996
Guidance on the selection of roller chain drives
ISO TR 10828:1997
Worm gears. Geometry of worm profiles
ISO 10834:1992
Textile floor coverings. Non-destructive measurement of pile thickness above the backing. WRONZ gauge method
ISO 10836:1994
Iron ores. Method of sampling and sample preparation for physical testing
ISO 10838-1:2000
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
ISO 10838-2:2000
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter greater than 63mm
ISO 10838-3:2001
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm
ISO 10840:2003
Plastics. Guidance for the use of standard fire tests
ISO 10844:1994
Acoustics. Specification of test tracks for the purpose of measuring noise emitted by road vehicles
ISO 10846-1:1999
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Principles and guidelines
ISO 10846-2:1999
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Dynamic stiffness of elastic supports for translatory motion. Direct method
ISO 10846-3:2002
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
ISO/IEC 10857:1994
Information technology. Microprocessor systems. Futurebus+. Logical protocol specification
ISO/IEC 10861:1994
Information technology. Microprocessor systems. High-performance synchronous 32-bit bus: MULTIBUS II
ISO 10882-1:2001
Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of airborne particles
ISO 10882-2:2000
Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of gases
ISO 10884:1995
Manually portable brush-cutters and grass trimmers with internal combustion engine. Determination of sound power levels. Engineering method (grade 2)
ISO/IEC 10885:1993
Information technology. 356 mm optical disk cartridge for information interchange. Write once
ISO 10889-1:1997
Tool holders with cylindrical shank. Cylindrical shank, location bore. Technical delivery conditions
ISO 10889-2:1997
Tool holders with cylindrical shank. Type A, shanks for tool holders of special designs
ISO 10889-3:1997
Tool holders with cylindrical shank. Type B with rectangular radial seat
ISO 10889-4:1997
Tool holders with cylindrical shank. Type C with rectangular axial seat
ISO 10889-5:1997
Tool holders with cylindrical shank. Type D with more than one rectangular seat
ISO 10889-6:1997
Tool holders with cylindrical shank. Type E with cylindrical seat
ISO 10889-7:1997
Tool holders with cylindrical shank. Type F with taper seat
ISO 10889-8:1997
Tool holders with cylindrical shank. Type Z, accessories
ISO 10897:1996
Collets for tool holders with taper ratio 1:10. Collets, holders, nuts
ISO 10914:1996
Assembly tools for screws and nuts. Sockets and wrenches for spline drive
ISO/IEC 10918-1:1994
Information technology. Digital compression and coding of continuous-tone still images. Requirements and guidelines
ISO/IEC 10918-2:1995
Information technology. Digital compression and coding of continuous-tone still images. Compliance testing
ISO/IEC 10918-4:1999
Information technology. Digital compression and coding of continuous-tone still images. Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types, and Registration Authorities (REGAUT)
ISO 10931-1:1997
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). General
ISO 10931-2:1997
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). Pipes
ISO 10931-3:1996
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). Fittings
ISO 10934-1:2002
Optics and optical instruments. Vocabulary for microscopy. Light microscopy
ISO 10936-1:2000
Optics and optical instruments. Operation microscopes. Requirements and test methods
ISO 10936-2:2001
Optics and optical instruments. Operation microscopes. Light hazard from operation microscopes used in ocular surgery
ISO 10938:1998
Ophthalmic instruments. Chart projectors
ISO 10939:1998
Ophthalmic instruments. Slit-lamp microscopes
ISO 10940:1998
Ophthalmic instruments. Fundus cameras
ISO 10942:1998
Ophthalmic instruments. Direct ophthalmoscopes
ISO 10943:1998
Ophthalmic instruments. Indirect ophthalmoscopes
ISO 10944:1998
Ophthalmic optics. Synoptophores
ISO 10945:1994
Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports
ISO 10946:1999
Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
ISO 10955:1999
End-fittings and turnbarrels for aircraft control wire rope. Technical specification
ISO 10959:2000
Aerospace. MJ threads. Gauging
ISO 10960:1997
Rubber and plastic hoses. Assessment of ozone resistance under dynamic conditions
ISO 10962:2001
Securities and related financial instruments. Classification of Financial Instruments (CFI code)
ISO 10964:1997
Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
ISO 10965:1998
Textile floor coverings. Determination of electrical resistance
ISO/IEC 10967-1:1994
Information technology. Language independent arithmetic. Integer and floating point arithmetic
ISO/IEC 10967-2:2001
Information technology. Language independent arithmetic. Elementary numerical functions
ISO 10972-1:1998
Cranes. Requirements for mechanisms. General
ISO 10993-1:1998
Biological evaluation of medical devices. Evaluation and testing
ISO 10993-2:1998
Biological evaluation of medical devices. Animal welfare requirements
ISO 10993-4:2002
Biological evaluation of medical devices. Selection of tests for interactions with blood
ISO 10993-5:1999
Biological evaluation of medical devices. Tests for in vitro cytotoxicity
ISO 10993-7:1996
Biological evaluation of medical devices. Ethylene oxide sterilization residuals
ISO 10993-8:2001
Biological evaluation of medical devices. Selection and qualification of reference materials for biological tests
ISO 10993-9:1999
Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products
ISO 10993-10:2002
Biological evaluation of medical devices. Tests for irritation and delayed-type hypersensitivity
ISO 10993-11:1996
Biological evaluation of medical devices. Tests for systemic toxicity
ISO 10993-12:1997
Biological evaluation of medical devices. Sample preparation and reference materials
ISO 10993-13:1999
Biological evaluation of medical devices. Identification and quantification of degradation products from polymeric medical devices
ISO 10993-14:2001
Biological evaluation of medical devices. Identification and quantification of degradation products from ceramics
ISO 10993-15:2001
Biological evaluation of medical devices. Identification and quantification of degradation products from metals and alloys
ISO 10993-16:1997
Biological evaluation of medical devices. Toxicokinetic study design for degradation products and leachables
ISO 10993-17:2002
Biological evaluation of medical devices. Establishment of allowable limits for leachable substances
ISO/IEC 10994:1992
Information technology. Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side. ISO Type 303
ISO 10998:1995
Agricultural wheeled tractors. Steering requirements
ISO 11003-1:2001
Adhesives. Determination of shear behaviour of structural adhesives. Torsion test method using butt-bonded hollow cylinders
ISO 11003-2:2001
Adhesives. Determination of shear behaviour of structural adhesives. Tensile test method using thick adherends
ISO 11021:1999
Essential oils. Determination of water content. Karl Fischer method
ISO 11023:1999
Liquorice extracts (Glycyrrhiza glabra L.). Determination of glycyrrhizic acid content. Methods using high-performance liquid chromatography
ISO 11041:1996
Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry
ISO 11042-1:1996
Gas turbines. Exhaust gas emission. Measurement and evaluation
ISO 11042-2:1996
Gas turbines. Exhaust gas emission. Automated emission monitoring
ISO 11056:1999
Sensory analysis. Methodology. Magnitude estimation method
ISO 11058:1999
Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load
ISO 11064-1:2001
Ergonomic design of control centres. Principles for the design of control centres
ISO 11064-2:2001
Ergonomic design of control centres. Principles for the arrangement of control suites
ISO 11064-3:2000
Ergonomic design of control centres. Control room layout
ISO 11070:1999
Sterile, single-use intravascular catheter introducers
ISO/IEC 11072:1993
Information Technology. Computer graphics. Computer Graphics Reference Model
ISO 11076:2000
Aerospace. Aircraft de-icing/anti-icing methods with fluids
DD ENV ISO 11079:1999
Evaluation of cold environments. Determination of required clothing insulation (IREQ)
ISO 11086:1996
Gas turbines. Vocabulary
ISO 11088:1993
Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system
ISO 11090-1:1998
Machine tools. Test conditions for die sinking electrodischarge machines (EDM). Terminology and testing of accuracy. Single column machines (cross slide table type and fixed table type)
ISO 11090-2:1998
Machine tools. Test conditions for die sinking electrodischarge machines (EDM). Terminology and testing of accuracy. Two column machines (slide-head type and cross-slide table type)
ISO 11091:1999
Construction drawings. Landscape drawing practice
ISO 11093-1:1994
Paper and board. Testing of cores. Sampling
ISO 11093-2:1994
Paper and board. Testing of cores. Co-ordinating of test samples
ISO 11093-3:1994
Paper and board. Testing of cores. Determination of moisture content using the oven drying method
ISO 11093-4:1997
Paper and board. Testing of cores. Measurement of dimensions
ISO 11093-5:1994
Paper and board. Testing of cores. Determination of characteristics of concentric rotation
ISO 11093-6:1996
Paper and board. Testing of cores. Determination of bending strength by the three-point method
ISO 11093-7:1997
Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
ISO 11093-8:1997
Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 11093-9:1994
Paper and board. Testing of cores. Determination of flat crush resistance
ISO 11095:1996
Linear calibration using reference materials
ISO 11096:2002
Road vehicles. Pedestrian protection. Impact test method for pedestrian thigh, leg and knee
ISO 11102-1:1997
Reciprocating internal combustion engines. Handle starting equipment. Safety requirements and tests
ISO 11102-2:1997
Reciprocating internal combustion engines. Handle starting equipment. Method of testing the angle of disengagement
ISO 11105:1997
Small craft. Ventilation of petrol engine and/or petrol tank compartments
ISO 11108:1996
Information and documentation. Archival paper. Requirements for permanence and durability
ISO 11111:1996
Safety requirements for textile machinery
ISO 11114-1:1998
Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
ISO 11114-2:2001
Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Non-metallic materials
ISO 11114-3:1998
Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Autogenous ignition test in oxygen atmosphere
ISO 11116-1:1999
Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Specifications
ISO 11116-2:1999
Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Inspection gauges
ISO 11120:1999
Gas cylinders. Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l. Design, construction and testing
ISO 11124-1:1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. General introduction and classification
ISO 11124-2:1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit
ISO 11124-3:1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. High-carbon cast-steel shot and grit
ISO 11124-4:1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
ISO 11125-1:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
ISO 11125-2:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
ISO 11125-3:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
ISO 11125-4:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density
ISO 11125-5:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of percentage defective particles and of microstructure
ISO 11125-6:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of foreign matter
ISO 11125-7:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture
ISO 11126-1:1997
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification
ISO 11126-3:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag
ISO 11126-4:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Coal furnace slag
ISO 11126-5:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Nickel refinery slag
ISO 11126-6:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Iron furnace slag
ISO 11126-7:2001
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Specification for fused aluminium oxide
ISO 11126-8:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Olivine sand
ISO 11127-1:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
ISO 11127-2:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution
ISO 11127-3:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density
ISO 11127-4:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Assessment of hardness by a glass slide test
ISO 11127-5:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of moisture
ISO 11127-6:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble contaminants by conductivity measurement
ISO 11127-7:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble chlorides
ISO 11130:1999
Corrosion of metals and alloys. Alternate immersion test in salt solution
DD ENV ISO 11133-1:2000
Microbiology of food and animal feeding stuffs. Guidelines on quality assurance and performance testing of culture media. General guidelines on quality assurance of culture media in the laboratory
ISO 11143:2000
Dental equipment. Amalgam separators
ISO 11144:1997
Dental equipment. Connections for supply and waste lines
ISO 11145:2001
Optics and optical instruments. Lasers and laser-related equipment. Vocabulary and symbols
ISO 11146:2000
Laser and laser-related equipment. Test methods for laser beam parameters. Beam width, divergence angle and beam
ISO 11149:1997
Optics and optical instruments. Lasers and laser related equipment. Fibre optic connectors for non-telecommunication laser applications
ISO 11151-1:2000
Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
ISO 11151-2:2000
Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
DD ISO/TS 11155-2:2002
Road vehicles. Air filters for passenger compartments. Test for gaseous filtration
ISO 11157:1999
Road vehicles. Brake lining assemblies. Inertia dynamometer test method
ISO 11158:1997
Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HR, HV and HG
ISO 11168:1995
Socket wrenches for spark and glow plugs
ISO 11170:1995
Hydraulic fluid power. Filter elements. Procedure for verifying performance characteristics
ISO 11171:1999
Hydraulic fluid power. Calibration of automatic particle counters for liquids
ISO/IEC 11172-1:1995
Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s. Systems
ISO/IEC 11172-2:1995
Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s. Video
ISO/IEC 11172-3:1995
Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s. Audio
ISO/IEC 11172-4:1997
Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s. Compliance testing
ISO 11174:1996
Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electro-thermal atomic absorption spectrometric method
ISO/IEC 11179-1:2004
Information Technology - Metadata registries (MDR) - Part 1: Framework
ISO/IEC 11179-2:2005
Information technology - Metadata registries (MDR) - Part 2: Classification
ISO/IEC 11179-3:2003
Information technology - Metadata registries (MDR) - Part 3: Registry metamodel and basic attributes
ISO/IEC 11179-4:2004
Information technology - Metadata registries (MDR) - Part 4: Formulation of data definitions
ISO/IEC 11179-5:2005
Information technology - Metadata registries (MDR) - Part 5: Naming and identification principles
ISO/IEC 11179-6:2005
Information technology - Metadata registries (MDR) - Part 6: Registration
ISP 11181-1:1995
Information technology. International standardized profile FOD26. Open document format: Enhanced document structure. Character, raster graphics and geometric graphics content architectures. Document Application Profile (DAP)
ISP 11182-1:1995
Information technology. International standardized profile FOD36. Open document format: Extended document structure. Character, raster graphics and geometric graphics content architectures. Document Application Profile (DAP)
ISP 11183-1:1995
Information technology. International standardized profiles AOM1n OSI management. Management communications. Specification of ACSE, presentation and session protocols for the use by ROSE and CMISE
ISP 11183-2:1995
Information technology. International standardized profiles AOM1n OSI management. Management communications. CMISE/ROSE for AOM12. Enhanced management communications
ISP 11183-3:1995
Information technology. International standardized profiles AOM1n OSI management. Management communications. CMISE/ROSE for AOM11. Basic management communications
ISO/IEC ISP 11184-1:1995
Information technology. International Standardized Profiles FVT1nn. Virtual Terminal Basic Class. Register of VTE- profiles. FVT121, FVT122. S-mode forms and paged VTE-profiles
ISO/IEC ISP 11184-2:1996
Information technology. International Standardized Profiles FVT1nn. Virtual Terminal Basic Class. Register of VTE- profiles. FVT115. A-mode Generalized Telnet VTE-profile
ISO/IEC ISP 11184-3:1996
Information technology. International Standardized Profiles FVT1nn. Virtual Terminal Basic Class. Register of VTE- profiles. FVT114. A-mode transparent VTE-profile
ISP 11185-1:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT211, FVT212. Sequenced and unsequenced application control objects
ISP 11185-2:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT213, FVT214. Sequenced and unsequenced terminal control objects
ISP 11185-3:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT215, FVT216. Application RIO record loading control object, terminal, RIO record notification control object
ISP 11185-4:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT217. Horizontal Tabulation Control Object
ISP 11185-5:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT218. Logical image control object
ISP 11185-6:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT219. Status message control object
ISP 11185-7:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT2110. Entry-Control Control Object
ISP 11185-8:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT221. Forms FEICO (Field Entry Instruction Control Object) No.1
ISP 11185-9:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT222. Paged FEICO (Field Entry Instruction Control Object) No. 1
ISP 11185-10:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT231. Forms FEPCO (Field Entry Pilot Control Object) No.1
ISP 11185-11:1996
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT232. Paged FEPCO (Field Entry Pilot Control Object) No. 1
ISO/IEC ISP 11185-12:1995
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT2116. Generalized Telnet Synch Control Object; FVT2117. Generalized Telnet Signal Control Object; FVT2118. Generalized Telnet Negotiation Control Object; FVT2119. Generalized Telnet Subnegotiation Control Object
ISO/IEC ISP 11185-13:1995
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT2111. Waiting time control object
ISO/IEC ISP 11185-14:1995
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT2112. Printer control object
ISO/IEC ISP 11185-15:1995
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT2113. Field definition management control object
ISO/IEC ISP 11185-16:1995
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT2114. Terminal signal titles control object
ISO/IEC ISP 11185-17:1995
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT2115. Help text control object
ISO/IEC 11186-2:1996
Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definitions. FVT311. Repertoire Assignment Type for ISO/IEC 10646
ISO/IEC ISP 11186-4:1997
Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definitions. FVT322. Font Assignment Type No. 2
ISP 11188-1:1997
Information technology. International standardized profiles. Common upper layer requirements. Basic connection oriented requirements
ISO/IEC ISP 11188-2:1996
Information technology. International standardized profiles. Common upper layer requirements. Basic connection oriented requirements for ROSE-based profiles
ISO/IEC ISP 11189:1997
Information technology. International standardized profile FD12. Directory data definitions. MHS use of the directory
ISP 11190:1996
Information technology. International standardized profile FD13. Directory data definitions. FTAM use of the directory
ISO 11195:1995
Gas mixers for medical use. Stand-alone gas mixers
ISO 11196:1997
Anaesthetic gas monitors
ISO 11199-1:1999
Walking aids manipulated by both arms. Requirements and test methods. Walking frames
ISO 11199-2:1999
Walking aids manipulated by both arms. Requirements and test methods. Rollators
ISO 11200:1996
Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 11201:1996
Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
ISO 11202:1996
Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
ISO 11203:1996
Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 11204:1996
Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
ISO 11210:1995
Determination of platinum in platinum jewellery alloys. Gravimetric method after precipitation of diammonium hexachloroplatinate
ISO 11212-1:1997
Starch and derived products. Heavy metals content. Determination of arsenic content by atomic absorption spectrometry
ISO 11212-2:1997
Starch and derived products. Heavy metals content. Determination of mercury content by atomic absorption spectrometry
ISO 11212-3:1997
Starch and derived products. Heavy metals content. Determination of lead content by atomic absorption spectrometry with electrothermal atomization
ISO 11212-4:1997
Starch and derived products. Heavy metals content. Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization
ISO 11213:1995
Modified starch. Determination of acetyl content. Enzymatic method
ISO 11214:1996
Modified starch. Determination of carboxyl group content of oxidized starch
ISO 11215:1998
Modified starch. Determination of adipic acid content of acetylated di-starch adipates. Gas-chromatographic method
ISO 11216:1998
Modified starch. Determination of content of carboxymethyl groups in carboxymethyl starch
ISO 11224:2003
Textiles. Web formation and bonding in nonwovens. Vocabulary
ISO 11235:1999
Rubber compounding ingredients. Sulfenamide accelerators. Test methods
ISO 11243:1994
Cycles. Luggage carriers for bicycles. Concepts, classification and testing
ISO 11244:2000
Dental brazing investments
ISO 11245:2000
Dental restorations. Phosphate-bonded refractory die materials
ISO 11246:2000
Dental ethyl silicate bonded casting investments
ISO 11248:2000
Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures
ISO 11254-1:2000
Lasers and laser-related equipment. Determination of laser-induced damage threshold of optical surfaces. 1-on-1 test
ISO 11254-2:2001
Lasers and laser-related equipment. Determination of laser-induced damage threshold of optical surfaces. S-on-1 test
ISO TR 11255:1994
Applicability of hard cutting materials for machining by chip removal. Information additional to ISO 513 designation
ISO 11271:2002
Soil quality. Determination of redox potential. Field method
ISO 11290-1:1997
Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of $7IListeria monocytogenes$7R. Detection method
ISO 11290-2:1998
Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of $7IListeria monocytogenes$7R. Enumeration method
ISO 11303:2002
Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion
ISO 11306:1998
Corrosion of metals and alloys. Guidelines for exposing and evaluating metals and alloys in surface sea water
ISO 11312:2000
Photography. Sheets of sensitized material for the pre-press industry. Dimensions and related requirements
ISO 11314:1995
Photography. Projectors. Image size/projection distance calculations
ISO 11315-3:1999
Photography. Projection in indoor rooms. Classification of transmitting projection screens and measurement of their transmitted luminance levels
ISO 11316:1999
Photography. Projection of still pictures. Measuring methods for the evaluation of imaging properties
ISO 11318:2002
Cardiac defibrillators. Connector assembly DF-1 for implantable defibrillators. Dimensions and test requirements
ISO/IEC 11319:1993
Information technology. 8 mm wide magnetic tape cartridge for information interchange. Helical scan recording
ISO/IEC 11321:1992
Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT format
ISO 11323:2002
Iron ore and direct reduced iron. Vocabulary
ISO 11334-1:1997
Walking aids manipulated by one arm. Requirements and test methods. Elbow crutches
ISO 11334-4:1999
Walking aids manipulated by one arm. Requirements and test methods. Walking sticks with three or more legs
ISO 11338-1:2003
Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Sampling
ISO 11341:1998
Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation
ISO 11342:1998
Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors
ISO 11345:1997
Rubber. Assessment of carbon black dispersion. Rapid comparative methods
ISO 11348-1:1999
Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using freshly prepared bacteria
ISO 11348-2:1999
Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using liquid-dried bacteria
ISO 11348-3:1999
Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using freeze-dried bacteria
ISO 11357-1:1997
Plastics. Differential scanning calorimetry (DSC). General principles
ISO 11357-2:1999
Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature
ISO 11357-3:1999
Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
ISO 11357-5:1999
Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
ISO 11357-6:2002
Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time
ISO 11357-7:2002
Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics
ISO 11358:1997
Plastics. Thermogravimetry (TG) of polymers. General principles
ISO 11359-1:1999
Plastics. Thermomechanical analysis (TMA). General principles
ISO 11359-2:1999
Plastics. Thermomechanical analysis (TMA). Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 11359-3:2002
Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature
ISO 11369:1997
Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
ISO 11376:2001
Plastics. Epoxy resins and glycidyl esters. Determination of inorganic chlorine
ISO 11377:1998
Textile floor coverings. Floor soiling. Test site set-up and soiling evaluation
ISO 11378-1:2000
Textile floor coverings. Laboratory soiling tests. Kappasoil test
ISO 11378-2:2001
Textile floor coverings. Laboratory soiling tests. Drum test
ISO 11379:1997
Textile floor coverings. Laboratory cleaning procedure using spray extraction
ISO 11380:1997
Optics and optical instruments. Ophthalmic optics. Formers
ISO 11381:1997
Optics and optical instruments. Ophthalmic optics. Screw threads
ISO 11399:2001
Ergonomics of the thermal environment. Principles and application of relevant International standards
ISO 11401:1998
Plastics. Phenolic resins. Separation by liquid chromatography
ISO 11402:1998
Plastics. Condensation resins. Determination of free formaldehyde
ISO 11403-1:2003
Plastics. Acquisition and presentation of comparable multipoint data. Mechanical properties
ISO 11403-2:2000
Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties
ISO 11403-3:2001
Plastics. Acquisition and presentation of comparable multipoint data. Environmental influences on properties
ISO/IEC 11404:1996
Information technology. Programming languages, their environments and system software interfaces. Language-independent datatypes
ISO 11408:1999
Chemical conversion coatings. Black oxide coating on iron and steel. Specification and test methods
ISO 11409:1998
Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry
ISO/IEC 11411:1995
Information technology. Representation for human communication of state transition of software
ISO 11415:1997
Tools for pressing. Die sets
ISO 11416:1995
Tennis rackets. Racket components and physical parameters
ISO 11421:1997
Optics and optical instruments. Accuracy of optical transfer function (OTF) measurement
ISO 11424:1996
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
ISO 11425:1996
Rubber hoses and hose assemblies for automobile power-steering systems. Specification
ISO 11426:1999
Determination of gold in gold jewellery alloys. Cupellation method (fire assay)
ISO 11431:2002
Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
ISO 11432:1998
Building construction. Sealants. Determination of resistance to compression
ISO 11438-1:1993
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. General requirements and sample dissolution
ISO 11438-2:1993
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of lead content
ISO 11438-3:1993
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of antimony content
ISO 11438-4:1993
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of tin content
ISO 11438-5:1993
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of tellurium content
ISO 11438-6:1993
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of thallium content
ISO 11438-7:1993
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of silver content
ISO 11438-8:1993
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of indium content
ISO 11439:2000
Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
ISO 11442-1:1996
Technical product documentation. Handling of computer-based technical information. Security requirements
ISO 11442-2:1996
Technical product documentation. Handling of computer-based technical information. Original documentation
ISO 11442-3:1996
Technical product documentation. Handling of computer-based technical information. Phases in the product design process
ISO 11442-4:1996
Technical product documentation. Handling of computer-based technical information. Document management and retrieval systems
ISO 11442-5:1999
Technical product documentation. Handling of computer-based technical information. Documentation in the conceptual design stage of the development phase
ISO TR 11444:1995
Quality of sawn wood used for the construction of pallets
ISO 11446:2002
Passenger cars and light commercial vehicles with 12 V systems. 13-pole connectors between towing vehicles and trailers. Dimensions and contact allocation
ISO 11450:1999
Equipment for harvesting and conservation. Round balers. Terminology and commercial specifications
ISO 11455:1995
Raw optical glass. Determination of birefringence
ISO 11461:2001
Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
ISO 11462-1:2001
Guidelines for implementation of statistical process control (SPC). Elements of SPC
ISO 11463:1995
Corrosion of metals and alloys. Evaluation of pitting corrosion
ISO 11468:2000
Plastics. Preparation of PVC pastes for test purposes. Dissolver method
ISO 11469:2000
Plastics. Generic identification and marking of plastics products
ISO 11475:1999
Paper and board. CIE whiteness, D65/10 degrees (outdoor daylight)
ISO 11476:2000
Paper and board. Determination of CIE whiteness, C/2$0D (indoor illumination conditions)
ISO 11480:1997
Pulp, paper and board. Determination of total chlorine and organically bound chlorine
ISO 11489:1995
Determination of platinum in platinum jewellery alloys. Gravimetric method after reduction with mercury(I) chloride
ISO 11490:1995
Determination of palladium in palladium jewellery alloys. Gravimetric method with dimethyl glyoxime
ISO 11498:2000
Dental handpieces. Dental low-voltage electric motors
ISO 11499:1999
Dental cartridges for local anaesthetics
ISO 11500:1997
Hydraulic fluid power. Determination of particulate contamination by automatic counting using the light extinction principle
ISO 11507:2001
Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV and water
ISO 11512:1995
Machinery for forestry. Tracked special machines. Performance criteria for brake systems
ISO 11520-2:2001
Agricultural grain driers. Determination of drying performance. Additional procedures and crop-specific requirements
ISO 11529-1:1998
Milling cutters. Designation. Shank type end mills of solid or tipped design
ISO 11529-2:1998
Milling cutters. Designation. Shank type and bore type milling cutters with indexable inserts
ISO 11533:1996
Iron ores. Determination of cobalt content. Flame atomic absorption spectrometric method
ISO 11539:1999
Ophthalmic optics. Contact lenses. Classification and contact lens materials
ISO 11541:2002
Natural gas. Determination of water content at high pressure
ISO 11542-1:2001
Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Designation system and basis for specifications
ISO 11542-2:1999
Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO 11543:2002
Modified starch. Determination of hydroxypropyl content. Method using proton nuclear magnetic resonance (NMR) spectrometry
ISO/IEC 11544:1995
Information technology. Coded representation of picture and audio information. Progressive bi-level image compression
ISO 11545:2001
Agricultural irrigation equipment. Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles. Determination of uniformity of water distribution
ISO 11546-1:1996
Acoustics. Determination of sound insulation performances of enclosures. Measurements under laboratory conditions (for declaration purposes)
ISO 11546-2:1996
Acoustics. Determination of sound insulation performances of enclosures. Measurements in situ (for acceptance and verification purposes)
ISO 11547:1996
Small craft. Start-in-gear protection
ISO 11551:1997
Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components
ISO TR 11552:1997
Lasers and laser-related equipment. Laser materials-processing machines. Performance specifications and benchmarks for cutting of metals
ISO 11554:2003
Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
ISO 11556:1998
Paper and board. Determination of curl using a single vertically suspended test piece
ISO/IEC 11557:1992
Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS-DC format using 60 m and 90 m length tapes
ISO/IEC 11558:1992
Information technology. Data compression for information interchange. Adaptive coding with embedded dictionary. DCLZ Algorithm
ISO/IEC 11559:1993
Information technology. Data interchange on 12,7 mm wide 18-track magnetic tape cartridges. Extended format
ISO/IEC 11560:1992
Information technology. Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
ISO 11561:1999
Ageing of thermal insulation materials. Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
ISO 11562:1998
Geometric product specifications (GPS). Surface texture: Profile method. Metrological characteristics of phase correct filters
ISO 11563:2003
Crude petroleum and petroleum products. Bulk cargo transfer. Guidelines for achieving the fullness of pipelines
ISO 11564:1998
Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method
ISO 11565:1998
Road vehicles. Spark plugs. Test methods and requirements
ISO 11566:1996
Carbon fibre. Determination of the tensile properties of single-filament specimens
ISO 11567:1995
Carbon fibre. Determination of filament diameter and cross-sectional area
ISO/IEC 11569:1993
Information technology. Telecommunications and information exchange between systems. 26-pole interface connector mateability dimensions and contact number assignments
ISO/IEC 11570:1992
Information technology. Telecommunications and information exchange between systems. Open systems interconnection. Transport protocol identification mechanism
ISO/IEC 11573:1994
Information technology. Telecommunications and information exchange between systems. Synchronization methods and technical requirements for Private Integrated Services Networks
ISO/IEC 11575:1995
Information technology. Telecommunications and information exchange between systems. Protocol mappings for the OSI data link service
ISO/IEC 11576:1994
Information technology. Procedure for the registration of algorithms for the lossless compression of data
ISO/IEC 11577:1995
Information technology. Open systems interconnection. Network layer security protocol
ISO/IEC 11578:1996
Information technology. Open systems interconnection. Remote procedure call (RPC)
ISO/IEC 11586-1:1996
Information technology. Open Systems Interconnection. Generic upper layers security. Overview, models and notation
ISO/IEC 11586-2:1996
Information technology. Open Systems Interconnection. Generic upper layers security. Security exchange service element (SESE) service definition
ISO/IEC 11586-3:1996
Information technology. Open systems interconnection. Generic upper layers security. Security exchange service element (SESE) protocol specification
ISO/IEC 11586-4:1996
Information technology. Open systems interconnection. Generic upper layers security. Protecting transfer syntax specification
ISO/IEC 11586-5:1997
Information technology. Open systems interconnection. Generic upper layers security. Security exchange service element (SESE) protocol implementation conformance statement (PICS) proforma
ISO/IEC 11586-6:1997
Information technology. Open systems interconnection. Generic upper layers security. Protecting transfer syntax protocol implementation conformance statement (PICS) proforma
ISO/IEC 11587:1996
Information technology. Open systems interconnection. Application context for systems management with transaction processing
ISO/IEC 11588-3:1997
Information technology. Message handling systems (MHS) management. Logging information
ISO/IEC 11588-8:1997
Information technology. Message handling systems (MHS) management. Message transfer agent management
ISO/IEC TR 11589:1995
Information technology. Open systems interconnection. LOTOS description of the CCR service
ISO/IEC TR 11590:1995
Information technology. Open systems interconnection. LOTOS description of the CCR protocol
ISO 11591:2001
Small craft, engine driven. Field of vision from helm position
ISO 11592:2001
Small craft less than 8 m length of hull. Determination of maximum propulsion power rating
ISO 11593:1998
Manipulating industrial robots. Automatic end effector systems. Vocabulary and presentation of characteristics
ISO 11599:1997
Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
ISO 11600:2002
Building construction. Jointing products. Classification and requirements for sealants
ISO 11605:1995
Paper and board. Calibration of variable-area flowmeters
ISO 11606:2001
Ships and marine technology. Marine electromagnetic compasses
ISO 11608-1:2001
Pen-injectors for medical use. Pen-injectors. Requirements and test methods
ISO 11608-2:2001
Pen-injectors for medical use. Needles. Requirements and test methods
ISO 11608-3:2001
Pen-injectors for medical use. Finished cartridges. Requirements and test methods
ISO 11609:1998
Dentistry. Toothpastes. Requirements, test methods and marking
ISO 11614:1999
Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
ISO 11620:1998
Information and documentation. Library performance indicators
ISO 11623:2002
Transportable gas cylinders. Periodic inspection and testing of composite gas cylinders
ISO 11628:1995
Graphic technology. Prints and printing inks. Determination of resistance of prints to acids
ISO 11630:1997
Cranes. Measurement of wheel alignment
ISO 11631:1998
Measurement of fluid flow. Methods of specifying flowmeter performance
ISO 11632:1998
Stationary source emissions. Determination of mass concentration of sulfur dioxide. Ion chromatography method
ISO 11640:1998
Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing
ISO 11642:1998
Leather. Tests for colour fastness. Colour fastness to water
ISO 11643:1998
Leather. Tests for colour fastness. Colour fastness of small samples to dry-cleaning solutions
ISO 11646:1998
Leather. Measurement of area
ISO 11648-1:2003
Statistical aspects of sampling from bulk materials. General principles
ISO 11648-2:2001
Statistical aspects of sampling from bulk materials. Sampling of particulate materials
ISO 11654:1997
Acoustics. Sound absorbers for use in buildings. Rating of sound absorption
ISO 11667:2000
Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods
ISO 11668:2001
Binders for paints and varnishes. Chlorinated polymerization resins. General methods of test
ISO 11670:2003
Lasers and laser-related equipment. Test methods for laser beam parameters. Beam positional stability
ISO 11674:2001
Ships and marine technology. Heading control systems
ISO 11680-1:2001
Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners. Units fitted with an integral combustion engine
ISO 11680-2:2001
Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners. Units for use with a back-pack power source
ISO 11681-2:1998
Machinery for forestry. Portable chainsaws. Safety requirements and testing. Chainsaws for tree service
ISO 11682:1993
Brush-cutters and grass trimmers. Technical data
ISO 11683:1997
Packaging. Tactile warnings of danger. Requirements
ISO 11688-1:1998
Acoustics. Recommended practice for the design of low-noise machinery and equipment. Planning
ISO/TR 11688-2:2001
Acoustics. Recommended practice for the design of low-noise machinery and equipment. Introduction to the physics of low-noise design
ISO 11689:1997
Acoustics. Procedure for the comparison of noise-emission data for machinery and equipment
ISO 11690-1:1997
Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Noise control strategies
ISO 11690-2:1997
Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Noise control measures
ISO 11690-3:1999
Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Sound propagation and noise prediction in workrooms
ISO 11691:1997
Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
ISO/IEC 11693:2000
Identification cards. Optical memory cards. General characteristics
ISO/IEC 11694-1:2000
Identification cards. Optical memory cards. Linear recording method. Physical characteristics
ISO/IEC 11694-2:2000
Identification cards. Optical memory cards. Linear recording method. Dimensions and location of the accessible optical area
ISO/IEC 11694-3:2001
Identification cards. Optical memory cards. Linear recording method. Optical properties and characteristics
ISO/IEC 11694-4:2001
Identification cards. Optical memory cards. Linear recording method. Logical data structures
ISO/TR 11696-1:1999
Uses of reaction to fire test results. Application of test results to predict fire performance of internal linings and other building products
ISO/TR 11696-2:1999
Uses of reaction to fire test results. Fire hazard assessment of construction products
ISO 11698-1:2000
Micrographics. Methods of measuring image quality produced by aperture card scanners. Characteristics of the test images
ISO 11698-2:2000
Micrographics. Methods of measuring image quality produced by aperture card scanners. Quality criteria and control
ISO 11715-1:1998
Ophthalmic optics. Format of digital data files for data transfer for profiling of spectacle lenses. Two-dimensional tracers
ISO 11721-1:2001
Textiles. Determination of resistance of cellulose-containing textiles to micro-organisms. Soil burial test. Assessment of rot-retardant finishing
DD ISO/TS 11725:2002
Solid mineral fuels. Determination of nitrogen. Semi-micro gasification method
ISO 11727:1999
Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components
ISO 11732:1997
Water quality. Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection
ISO 11733:1998
Water quality. Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium. Activated sludge simulation test
ISO 11734:1999
Water quality. Evaluation of the 'ultimate' anaerobic biodegradability of organic compounds in digested sludge. Method by measurement of the biogas production
ISO/IEC TR 11735:1996
Information technology. Extensions for real-time Ada
ISO 11737-2:2000
Sterilization of medical devices. Microbiological methods. Tests of sterility performed in the validation of a sterilization process
ISO 11752:2000
Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts
ISO 11754:2003
Space data and information transfer systems. Telemetry channel coding
ISO/IEC 11756:1999
Information technology. Programming languages. M
ISO 11758:1997
Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance
ISO TR 11761:1992
Light-gauge metal containers. Round open-top cans. Classification of can sizes by construction type
ISO TR 11762:1992
Light-gauge metal containers. Round open-top cans for liquid products with added gas. Classification of can sizes by construction type
ISO/IEC 11770-3:1999
Information technology. Security techniques. Key management. Mechanisms using asymmetric techniques
ISO TR 11776:1992
Light gauge metal containers. Non-round open-top cans. Cans defined by their nominal capacities
ISO 11782-1:1998
Corrosion of metal and alloys. Corrosion fatigue testing. Cycles to failure testing
ISO 11782-2:1998
Corrosion of metal and alloys. Corrosion fatigue testing. Crack propagation testing using precracked specimens
ISO 11783-2:2002
Tractors and machinery for agriculture and forestry. Serial control and communications data network. Physical layer
ISO 11783-3:1998
Tractors and machinery for agriculture and forestry. Serial control and communications data network. Data link layer
ISO 11783-7:2002
Tractors and machinery for agriculture and forestry. Serial control and communications data network. Implement messages application layer
ISO 11783-9:2002
Tractors and machinery for agriculture and forestry. Serial control and communications data network. Tractor ECU
ISO 11784:1996
Radio-frequency identification of animals. Code structure
ISO 11785:1996
Radio-frequency identification of animals. Technical concept
ISO 11786:1995
Agricultural tractors and machinery. Tractor mounted sensor interface. Specification
ISO 11787:1995
Machinery for agriculture and forestry. Data interchange between management computer and process computers. Data interchange syntax
ISO 11788-1:1997
Electronic data interchange between information systems in agriculture. Agricultural data element dictionary. General description
ISO 11788-3:2000
Electronic data interchange between information systems in agriculture. Agricultural data element dictionary. Pig farming
ISO 11798:1999
Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods
ISO 11800:1998
Information and documentation. Requirements for binding materials and methods used in the manufacture of books
ISO/IEC TR 11802-5:1997
Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines. Media access control (MAC) bridging of Ethernet V2.0 in Local Area Networks
ISO 11806:1997
Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety
ISO 11807-1:2001
Integrated optics. Vocabulary. Basic terms and symbols
ISO 11807-2:2001
Integrated optics. Vocabulary. Terms used in classification
ISO 11810:2002
Optics and optical instruments. Lasers and laser-related equipment. Test method for the laser-resistance of surgical drapes and/or patient-protective covers
ISO 11812:2002
Small craft. Watertight cockpits and quick-draining cockpits
ISO 11813:1998
Milk and milk products. Determination of zinc content. Flame atomic absorption spectrometric method
ISO 11814:2002
Dried milk. Assessment of heat treatment intensity. Method using high-performance liquid chromatography
ISO 11816-1:2000
Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric method. Milk and milk based drinks
ISO 11816-2:2003
Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric method. Fluorometric method for cheese
ISO 11819-1:2001
Acoustics. Measurement of the influence of road surfaces on traffic noise. Statistical pass-by method
ISO 11820:1997
Acoustics. Measurements on silencers in situ
ISO 11821:1997
Acoustics. Measurement of the in situ sound attenuation of a removable screen
ISO 11822:1996
Information and documentation. Extension of the Arabic alphabet coded character set for bibliographic information interchange
ISO 11833-1:1998
Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics. Sheets of thickness not less than 1 mm
ISO 11833-2:1998
Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics. Sheets of thickness less than 1 mm
ISO 11841-1:2000
Road vehicles and internal combustion engines. Filter vocabulary. Definitions of filters and filter components
ISO 11841-2:2000
Road vehicles and internal combustion engines. Filter vocabulary. Definitions of characteristics of filters and their components
ISO 11843-1:1997
Capability of detection. Terms and conditions
ISO 11843-2:2000
Capability of detection. Methodology in the linear calibration case
ISO 11843-3:2003
Capability of detection. Methodology for determination of the critical value for the response variable when no calibration data are used
ISO 11846:1995
Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
ISO 11850:2003
Machinery for forestry. Self-propelled machinery. Safety requirements
DD ISO/PAS 11856:2003
Textile floor coverings. Test methods for the determination of fibre bind
ISO 11857:2002
Textile floor coverings. Determination of resistance to delamination
ISO 11858:1999
Textile floor coverings. Determination of friability of attached foams
ISO 11859:1999
Textile floor coverings. Pure wool, hand-knotted pile carpets. Specification
ISO 11860:1999
Textile floor coverings. Jute carpet backing fabric. Specification
ISO 11861:1999
Textile floor coverings. Coir mats. Types and specification
ISO 11866-1:1997
Milk and milk products. Enumeration of presumptive $7IEscherichia coli$7R. Most probable number technique
ISO 11866-2:1997
Milk and milk products. Enumeration of presumptive $7IEscherichia coli$7R. Most probable number technique using 4-methylumbelliferyl-$Gb-D-glucuronide (MUG)
ISO 11866-3:1997
Milk and milk products. Enumeration of presumptive $7IEscherichia coli$7R. Colony-count technique at 44$0DC using membranes
ISO 11870:2000
Milk and milk products. Determination of fat content. General guidance on the use of butyrometric methods
ISO 11885:1998
Water quality. Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy
ISO 11886:2002
Building construction machinery and equipment. Pile driving and extracting equipment. Terminology and commercial specifications
ISO 11890-1:2001
Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method
ISO 11890-2:2001
Paints and varnishes. Determination of volatile organic compound (VOC) content. Gas chromatographic method
ISO 11897:2001
Packaging. Sacks made from thermoplastic flexible film. Tear propagation on edge folds
ISO 11900-2:2001
Tools for pressing. Ball-lock punch retainers. Types C and D, reduced for light duty
ISO 11904-1:2002
Acoustics. Determination of sound immission from sound sources placed close to the ear. Technique using a microphone in a real ear (MIRE technique)
ISO 11905-1:1998
Water quality. Determination of nitrogen. Method using oxidative digestion with peroxodisulfate
ISO 11907-1:1998
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Guidance
ISO 11907-2:1995
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Static method
ISO 11907-3:1998
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a travelling furnace
ISO 11907-4:1998
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a conical radiant heater
ISO 11908:1998
Binders for paints and varnishes. Amino resins. General methods of test
ISO 11909:1998
Binders for paints and varnishes. Polyisocyanate resins. General methods of test
ISO 11922-1:1997
Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Metric series
ISO 11922-2:1997
Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Inch-based series
ISO TR 11925-1:1999
Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Guidance on ignitability
ISO 11925-2:2002
Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Single-flame source test
ISO 11925-3:1997
Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Multi-source test
ISO 11928-1:2000
Micrographics. Quality control of graphic COM recorders. Characteristics of the test frames
ISO 11928-2:2000
Micrographics. Quality control of graphic COM recorders. Quality criteria and control
ISO 11929-4:2001
Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
ISO 11933-3:1998
Components for containment enclosures. Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums
ISO 11943:1999
Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation
ISO 11944:1993
Round general use light gauge metal containers. Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity
ISO 11948-1:1996
Urine-absorbing aids. Whole-product testing
ISO 11948-2:1998
Urine-absorbing aids. Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure
ISO 11957:1997
Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
ISO 11960:2001
Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
ISO 11961:1997
Petroleum and natural gas industries. Steel pipes for use as drill pipe. Specification
ISO 11962:2002
Micrographics. Image mark (blip) used with 16 mm and 35 mm roll microfilm
ISO 11963:1996
Plastics. Polycarbonate sheets. Types, dimensions and characteristics
ISO 11969:1996
Water quality. Determination of arsenic. Atomic absorption spectrometric method (hydride technique)
ISO TR 11974:1997
Measurement of liquid flow in open channels. Electromagnetic current meters
ISO 11978:2000
Ophthalmic optics. Contact lenses and contact lens care products. Information supplied by the manufacturer
ISO 11979-1:2000
Ophthalmic implants. Intraocular lenses. Vocabulary
ISO 11979-2:2000
Ophthalmic implants. Intraocular lenses. Optical properties and test methods
ISO 11979-4:2000
Ophthalmic implants. Intraocular lenses. Labelling and information
ISO 11980:1998
Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations
ISO 11981:1999
Ophthalmic optics. Contact lenses and contact lens care products. Determination of physical compatibility of contact lens care products with contact lenses
ISO 11984:2000
Ophthalmic optics. Contact lenses. Determination of rigid lens flexure and breakage
ISO 11985:1998
Ophthalmic optics. Contact lenses. Ageing by exposure to UV and visible radiation (in vitro method)
ISO 11986:2001
Ophthalmic optics. Contact lenses and contact lens care products. Guidelines for the determination of preservative uptake and release
ISO 11987:1998
Ophthalmic optics. Contact lenses. Determination of shelf-life
ISO 11990:2003
Optics and optical instruments. Lasers and laser-related equipment. Determination of laser resistance of tracheal tube shafts
ISO TR 11991:1995
Guidance on airway management during laser surgery of upper airway
ISO 11994:1997
Cranes. Availability. Vocabulary
ISO 11998:2001
Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings
ISO 12000:2000
Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods
ISO 12001:1997
Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
ISO 12003-1:2002
Agricultural and forestry tractors. Narrow-track wheeled tractors. Front-mounted roll-over protective structures
ISO 12003-2:2002
Agricultural and forestry tractors. Narrow-track wheeled tractors. Rear-mounted roll-over protective structures
ISO 12005:2003
Lasers and laser-related equipment. Test methods for laser beam parameters. Polarization
ISO 12006-2:2001
Building construction. Organization of information about construction works. Framework for classification of information
ISO/PAS 12006-3:2001
Building construction. Organization of information about construction works. Framework for object-oriented information exchange
ISO 12017:1996
Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods
ISO 12020:2000
Water quality. Determination of aluminium. Atomic absorption spectrometric methods
ISO/TR 12031:2000
Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration
ISO 12040:1997
Graphic technology. Prints and printing inks. Assessment of light fastness using filtered xenon arc light
ISO/IEC 12042:1993
Information technology. Data compression for information interchange. Binary arithmetic coding algorithm
ISO 12043:1995
Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
ISO 12044:1995
Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side
ISO 12048:2001
Packaging. Complete, filled transport packages. Compression and stacking tests using a compression tester
ISO 12058-1:2002
Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
ISO/IEC ISP 12059-0:1995
Information technology. International standardized profiles. OSI management. Common information for management functions. Common definitions for management function profiles
ISO/IEC ISP 12059-1:1995
Information technology. International standardized profiles. OSI management. Common information for management functions. Object management
ISO/IEC ISP 12059-2:1995
Information technology. International standardized profiles. OSI management. Common information for management functions. State management
ISO/IEC ISP 12059-3:1995
Information technology. International standardized profiles. OSI management. Common information for management functions. Attributes for representing relationships
ISO/IEC ISP 12059-4:1995
Information technology. International standardized profiles. OSI management. Common information for management functions. Alarm reporting
ISO/IEC ISP 12059-5:1995
Information technology. International standardized profiles. OSI management. Common information for management functions. Event report management
ISO/IEC ISP 12059-6:1995
Information technology. International standardized profiles. OSI management. Common information for management functions. Log control
ISO/IEC ISP 12060-8:1996
Information technology. International standardized profiles. OSI management. Management functions. AOM253x. Summarization objects (including profiles AOM2531-AOM2539)
ISP 12061-1:1997
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Introduction to the transaction processing profiles
ISP 12061-2:1997
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Support of OSI TP APDUs
ISP 12061-3:1997
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Support of CCR APDUs
ISP 12061-4:1997
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Support of session, presentation and ACSE PDUs
ISP 12061-5:1996
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Application supported transactions. Polarized control (ATP11)
ISP 12061-6:1996
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Application supported transactions. Shared control (ATP12)
ISP 12061-7:1996
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Provider supported unchained transactions. Polarized control (ATP21)
ISP 12061-8:1996
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Provider supported unchained transactions. Shared control (ATP22)
ISP 12061-9:1996
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Provider supported chained transactions. Polarized control (ATP31)
ISP 12061-10:1996
Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Provider supported chained transactions. Shared control (ATP32)
ISP 12064-1:1998
Information technology. International standardized profile FOD112. Open document format: image applications. Simple document structure. Raster graphics content architecture. Document application profile (DAP) (ISO/IEC ISP 12064-1:1995)
ISP 12068-1:1997
Information technology. International standardized profile FDI 4. Directory data definitions. Use of the directory for OSI TP. FDI 41. Basic naming and addressing
ISP 12068-2:1997
Information technology. International standardized profile FDI 4. Directory data definitions. Use of the directory for OSI TP. FDI 42. Enhanced naming and addressing
ISP 12070-1:1997
Information technology. International standardized profiles FCSnnn. Character set 8-bit code structure based on ISO/IEC 2022. FCS111. 2022 Option 1
ISO/IEC ISP 12073:2000
Information technology. International standardized profile FD16 directory data definitions. EDI use of the directory
ISO 12080-1:2000
Dried skimmed milk. Determination of vitamin A content. Colorimetric method
ISO 12080-2:2000
Dried skimmed milk. Determination of vitamin A content. Method using high-performance liquid chromatography
ISO 12081:1998
Milk. Determination of calcium content. Titrimetric method
ISO 12085:1998
Geometric Product Specification (GPS). Surface texture. Profile method. Motif parameters
ISO 12086-1:2001
Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Designation system and basis for specifications
ISO 12086-2:2001
Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO/IEC 12087-1:1995
Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification. Common architecture for imaging
ISO/IEC 12087-2:1994
Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification. Programmer's imaging kernel system application program interface
ISO/IEC 12087-3:1995
Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification. Image interchange facility (IIF)
ISO/IEC 12088-4:1995
Information technology. Computer graphics and image processing. Image processing and interchange. Application program interface language bindings. C
ISO/IEC 12089:1997
Information technology. Computer graphics and image processing. Encoding for the image interchange facility (IIF)
ISO 12097-1:2002
Road vehicles. Airbag components. Vocabulary
ISO 12097-3:2002
Road vehicles. Airbag components. Testing of inflator assemblies
ISO 12103-1:1997
Road vehicles. Test dust for filter evaluation. Arizona test dust
ISO 12103-2:1997
Road vehicles. Test dust for filter evaluation. Aluminium oxide test dust
ISO 12114:1997
Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics
ISO 12115:1997
Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of flowability, maturation and shelf life
ISO/IEC 12119:1994
Information technology. Software packages. Quality requirements and testing
ISO 12124:2001
Acoustics. Procedures for the measurement of real-ear acoustical characteristics of hearing aids
ISO 12128:2001
Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes
ISO 12129-2:1995
Plain bearings. Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
ISO 12132:1999
Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
ISO 12138:1997
Textiles. Domestic laundering procedures for textile fabrics prior to flammability testing
ISO 12140:1998
Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks
ISO 12141:2002
Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
ISO 12142:2001
Electronic imaging. Media error monitoring and reporting techniques for verification of stored data on optical digital data disks
ISO 12151-1:1999
Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-3 O-ring face-seal ends
ISO 12151-2:2003
Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-1 and ISO 8434-4 24$0D cone connector ends with O-rings
ISO 12151-3:1999
Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6162 flange ends
ISO 12156-1:1997
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
ISO 12156-1:2000
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
ISO 12156-2:1998
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Limit
ISO 12162:1996
Thermoplastics materials for pipes and fittings for pressure applications. Classification and design. Overall service (design) coefficient
ISO 12163:2000
Dental baseplate/modelling wax
ISO 12164-1:2001
Hollow taper interface with flange contact surface. Shanks. Dimensions
ISO 12164-2:2001
Hollow taper interface with flange contact surface. Receivers. Dimensions
ISO 12165:2000
Tools for moulding. Components of compression and injection moulds and diecasting dies. Terms and symbols
ISO 12171:2002
Space data and information transfer systems. Telecommand. Channel service
ISO 12172:2003
Space data and information transfer systems. Telecommand. Data routing service
ISO 12173:2003
Space data and information transfer systems. Telecommand. Command operation procedures
ISO 12174:2003
Space data and information transfer systems. Telecommand. Architectural specification for the data management service
ISO 12179:2001
Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
ISO/IEC TR 12182:1998
Information technology. Categorization of software
ISO 12185:1996
Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method
ISO 12192:2002
Paper and board. Compressive strength. Ring crush method
ISO 12193:2000
Animal and vegetable fats and oils. Determination of lead content. Graphite furnace atomic absorption method
ISO 12197:1996
Woodruff keyseat cutters. Dimensions
ISO 12199:2000
Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
ISO 12205:1996
Methods of test for petroleum and its products. Petroleum products. Determination of the oxidation stability of middle-distillate fuels
ISO 12209-1:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Yoke type connections
ISO 12209-2:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Threaded connections
ISO 12209-3:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Adaptor for 230 bar valves
ISO 12213-1:1997
Natural gas. Calculation of compression factors. Introduction and guidelines
ISO 12213-2:1997
Natural gas. Calculation of compression factors. Calculation using a molar composition analysis
ISO 12213-3:1997
Natural gas. Calculation of compression factors. Calculation using measured physical properties
ISO 12214:2002
Road vehicles. Direction-of-motion stereotypes for automotive hand controls
ISO 12215-1:2000
Small craft. Hull construction and scantlings. Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate
ISO 12215-2:2002
Small craft. Hull construction and scantlings. Materials. Core materials for sandwich construction, embedded materials
ISO 12215-3:2002
Small craft. Hull construction and scantlings. Materials. Steel, aluminium alloys, wood, other materials
ISO 12215-4:2002
Small craft. Hull construction and scantlings. Workshop and manufacturing
ISO 12216:2002
Small craft. Windows, portlights, hatches, deadlights and doors. Strength and watertightness requirements
ISO 12217-1:2002
Small craft. Stability and buoyancy assessment and categorization. Non-sailing boats of hull length greater than or equal to 6 m
ISO 12217-2:2002
Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
ISO 12217-3:2002
Small craft. Stability and buoyancy assessment and categorization. Boats of hull length less than 6 m
ISO 12218:1997
Graphic technology. Process control. Offset platemaking
ISO 12222:2000
Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film. Specifications and dimensions
ISO 12224-1:1998
Solder wire, solid and flux cored. Specification and test methods. Classification and performance requirements
ISO 12224-2:1999
Solder wire, solid and flux cored. Specification and test methods. Determination of flux content
ISO 12224-3:2003
Solder wire, solid and flux cored. Specification and test methods. Wetting balance test method for flux core solder wire efficacy
ISO 12228:1999
Animal and vegetable fats and oils. Determination of individual and total sterols contents. Gas chromatographic method
ISO 12231:1997
Photography. Electronic still picture cameras. Terminology
ISO 12232:1998
Photography. Electronic still-picture cameras. Determination of ISO speed
ISO 12233:2000
Photography. Electronic still picture cameras. Resolution measurements
ISO 12234-1:2001
Electronic still-picture imaging. Removable memory. Basic removable-memory module
ISO 12234-2:2001
Electronic still-picture imaging. Removable memory. TIFF/EP image data format
ISO 12236:1996
Geotextiles and geotextile-related products. Static puncture test (CBR-Test)
ISO 12238:2001
Pneumatic fluid power. Directional control valves. Measurement of shifting time
ISO 12240-1:1998
Spherical plain bearings. Radial spherical plain bearings
ISO 12240-2:1998
Spherical plain bearings. Angular contact radial spherical plain bearings
ISO 12240-3:1998
Spherical plain bearings. Thrust spherical plain bearings
ISO 12240-4:1998
Spherical plain bearings. Spherical plain bearing rod ends
ISO 12241:1998
Thermal insulation for building equipment and industrial installations. Calculation rules
ISO/IEC 12246:1993
Information technology. 8 mm wide magnetic tape cartridge dual azimuth format for information interchange. Helical scan recording
ISO/IEC 12247:1993
Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format using 60 m and 90 m length tapes
ISO/IEC 12248:1993
Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT-DC format using 60 m and 90 m length tapes
ISO 12256:2002
Drives, internal, cruciform, ribbed. Metric series
ISO 12277:2000
Aerospace. Gang channel, self-locking, floating, standard series, with counterbore, classifications. 1100 MPa (at ambient temperature)/120$0DC, 1100 MPa (at ambient temperature)/235$0DC and 1100 MPa (at ambient temperature)/425$0DC. Dimensions
ISO 12303:1995
Plain bearings. Quality characteristics. Calculation of machine and process capabilities
ISO 12307-2:2000
Plain bearings. Checking of wrapped bushes. Checking the inside diameter
ISO 12333:2000
Aerospace. Constant displacement hydraulic motors. General specifications for 35000 kPa systems
ISO 12334:2000
Aerospace. Hydraulic, pressure-compensated, variable delivery pumps. General requirements for 35000 kPa systems
ISO 12345:2002
Diesel engines. Cleanliness assessment of fuel injection equipment
ISO 12353-1:2002
Road vehicles. Traffic accident analysis. Vocabulary
ISO 12353-2:2003
Road vehicles. Traffic accident analysis. Guidelines for the use of impact severity measures
ISO 12368:2001
Agricultural vehicles. Mechanical hook-type connections on towing vehicles. Test methods and requirements
ISO/IEC TR 12382:1992
Permuted index of the vocabulary of information technology
ISO/TR 12391-1:2001
Gas cylinders. Refillable seamless steel. Performance tests. Philosophy, background and conclusions
ISO/TR 12391-2:2002
Gas cylinders. Refillable seamless steel. Performance tests. Fracture performance tests. Monotonic burst tests
ISO/TR 12391-3:2002
Gas cylinders. Refillable seamless steel. Performance tests. Fracture performance tests. Cyclical burst tests
ISO/TR 12470:1998
Fire resistance tests. Guidance on the application and extension of results
ISO 12472:2003
Fire resistance of timber door assemblies. Method of determining the efficacy of intumescent seals
ISO 12478-1:1998
Cranes. Maintenance manual. General
ISO 12543-1:1998
Glass in building. Laminated glass and laminated safety glass. Definitions and description of component parts
ISO 12543-3:1998
Glass in building. Laminated glass and laminated safety glass. Laminated glass
ISO 12543-4:1998
Glass in building. Laminated glass and laminated safety glass. Test methods for durability
ISO 12543-5:1998
Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing
ISO 12543-6:1998
Glass in building. Laminated glass and laminated safety glass. Appearance
ISO 12567-1:2000
Thermal performance of windows and doors. Determination of thermal transmittance by hot box method. Complete windows and doors
ISO 12569:2001
Thermal insulation in buildings. Determination of air change in buildings. Tracer gas dilution method
ISO 12570:2000
Hygrothermal performance of building materials and products. Determination of moisture content by drying at elevated temperature
ISO 12571:2000
Hygrothermal performance of building materials and products. Determination of hygroscopic properties
ISO 12572:2001
Hygrothermal performance of building materials and products. Determination of water vapour transmission properties
ISO 12606:1997
Cinematography. Care and preservation of magnetic audio recordings for motion-pictures and television
ISO 12608:1996
Cinematography. Room and surround conditions for evaluating television display from telecine reproduction
ISO 12611:1997
Cinematography. Audio head tones for use in international exchange of 35 mm magnetic film masters. Specifications and location
ISO 12612:1997
Cinematography. Interchange of post-production materials
ISO 12616:2002
Translation-oriented terminography
ISO 12634:1996
Graphic technology. Determination of tack of paste inks and vehicles by a rotary tackmeter
ISO 12635:1996
Graphic technology. Plates for offset printing. Dimensions
ISO 12636:1998
Graphic technology. Blankets for offset printing
ISO 12637-5:2001
Graphic technology. Multilingual terminology of printing arts. Screen printing terms
ISO 12639:1998
Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)
ISO 12640:1997
Graphic technology. Prepress digital data exchange. CMYK standard colour image data (CMYK/SCID)
ISO 12641:1997
Graphic technology. Prepress digital data exchange. Colour targets for input scanner calibration
ISO 12642:1996
Graphic technology. Prepress digital data exchange. Input data for characterization of 4-colour process printing
ISO 12644:1996
Graphic technology. Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
ISO 12645:1998
Graphic technology. Process control. Certified reference material for opaque area calibration of transmission densitometers
ISO 12647-1:1996
Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Parameters and measurement methods
ISO 12647-2:1996
Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Offset lithographic processes
ISO 12647-3:1998
Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Coldset offset lithography and letterpress on newsprint
ISO 12647-5:2001
Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Screen printing
ISO 12651:1999
Electronic imaging. Vocabulary
ISO 12653-1:2000
Electronic imaging. Test target for the black-and-white scanning of office documents. Characteristics
ISO 12653-2:2000
Electronic imaging. Test target for the black-and-white scanning of office documents. Method of use
ISO 12656:2001
Micrographics. Use of bar codes on aperture cards
ISO 12676:2000
Refractory products. Determination of resistance to carbon monoxide
ISO 12677:2003
Chemical analysis of refractory products by XRF. Fused cast bead method
ISO 12686:1999
Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
ISO 12687:1998
Metallic coatings. Porosity tests. Humid sulfur (flowers of sulfur) test
ISO 12706:2001
Non-destructive testing. Terminology. Terms used in penetrant testing
ISO 12737:1999
Metallic materials. Determination of plane-strain fracture toughness
ISO TR 12764:1997
Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
ISO/TR 12765:1998
Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
ISO TR 12767:1998
Measurement of fluid flow by means of pressure-differential devices. Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1
ISO 12771:1997
Plastics laboratory ware. Disposable serological pipettes
ISO 12772:1997
Laboratory glassware. Disposable microhaematocrit capillary tubes
ISO 12775:1997
Guidelines on types of glass of normal bulk-production composition and their test methods
ISO TR 12776:1995
Pallets. Slip sheets
ISO 12777-1:1997
Methods of test for pallet joints. Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
ISO 12777-2:2000
Methods of test for pallet joints. Determination of withdrawal and head pull-through resistance of pallet nails and staples
ISO 12777-3:2002
Methods of test for pallet joints. Determination of strength of pallet joints
ISO 12789:2000
Reference neutron radiations. Characteristics and methods of production of simulated workplace neutron fields
ISO 12794:2000
Nuclear energy. Radiation protection. Individual thermoluminescence dosemeters for extremities and eyes
ISO 12819:1999
Methods of evaluation of the lifetime of a battery-powered watch
ISO 12864:1998
Ophthalmic optics. Contact lenses. Determination of scattered light
ISO 12865:1998
Ophthalmic instruments. Retinoscopes
ISO 12866:1999
Ophthalmic instruments. Perimeters
ISO 12867:1998
Ophthalmic instruments. Trial frames
ISO 12870:1998
Ophthalmic optics. Spectacle frames. General requirements and test methods
ISO 12894:2001
Ergonomics of the thermal environment. Medical supervision of individuals exposed to extreme hot or cold environments
DD ISO/TS 12902:2002
Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
ISO 12917-1:2002
Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Manual methods
ISO 12917-2:2002
Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Internal electro-optical distance-ranging method
ISO 12922:2002
Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
ISO 12925-1:1996
Lubricants, industrial oils and related products (class L). Family C (Gears). Specifications for lubricants for enclosed gear systems
ISO/TS 12927:1999
Lubricants, industrial oils and related products (class L). Family M (metalworking). Guidelines for establishing specifications
ISO/TS 12928:1999
Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications
ISO 12937:2001
Methods of test for petroleum and its products. 2000-438:Petroleum products. Determination of content. Coulometric Karl Fischer titration method
ISO 12944-1:1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. General introduction
ISO 12944-2:1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Classification of environments
ISO 12944-3:1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Design considerations
ISO 12944-4:1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Types of surface and surface preparation
ISO 12944-5:1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Protective paint systems
ISO 12944-6:1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Laboratory performance test methods
ISO 12944-7:1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Execution and supervision of paintwork
ISO 12944-8:1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Development of specifications for new work and maintenance
ISO 12945-1:2001
Textiles. Determination of fabric propensity to surface fuzzing and to pilling. Pilling box method
ISO 12945-2:2000
Textiles. Determination of fabric propensity to surface fuzzing and to pilling. Modified Martindale method
ISO 12947-1:1999
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Martindale abrasion testing apparatus
ISO 12947-2:1999
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of specimen breakdown
ISO 12947-3:1999
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of mass loss
ISO 12947-4:1999
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Assessment of appearance change
ISO 12952-1:1999
Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a smouldering cigarette
ISO 12952-2:1999
Textiles. Burning behaviour of bedding items. Specific test methods for the ignitability by a smouldering cigarette
ISO 12952-3:1999
Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a small open flame
ISO 12952-4:1999
Textiles. Burning behaviour of bedding items. Specific test methods for the ignitability by a small open flame
ISO 12956:1999
Geotextiles and geotextile-related products. Determination of the characteristic opening size
ISO 12958:1999
Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
ISO 12965:2000
Butadiene rubber. Determination of microstructure by infra-red spectrometry
ISO 12992:1995
Plastics. Vertical flame spread determination for film and sheet
ISO 13000-1:1998
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Requirements and designation
ISO 13000-2:1998
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Preparation of test specimens and determination of properties
ISO 13002:1999
Carbon fibre. Designation system for filament yarns
ISO 13012:1998
Rolling bearings, linear motion, recirculating ball, sleeve type. Accessories
ISO 13050:1999
Curvilinear toothed synchronous belt drive systems
ISO 13090-1:1998
Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with people. Exposure to whole-body mechanical vibration and repeated shock
ISO/IEC 13210:1999
Information technology. Requirements and guidelines for test methods specifications and test method implementation for measuring conformance to POSIX standards
ISO/IEC 13211-1:1995
Information technology. Programming languages. Prolog. General core
ISO/IEC 13211-2:2000
Information technology. Programming languages. Prolog. Modules
ISO 13212:1999
Ophthalmic optics. Contact lens care products. Guidelines for the determination of shelf-life
ISO/IEC 13213:1994
Information technology. Microprocessor systems. Control and Status Registers (CSR) Architecture for microcomputer buses
ISO 13215-2:1999
Road vehicles. Reduction of misuse risk of child restraint systems. Requirements and test procedures for correct installation (panel method)
ISO 13215-3:1999
Road vehicles. Reduction of misuse risk of child restraint systems. Prediction and assessment of misuse by misuse mode and effect analysis (MMEA)
ISO 13216-1:1999
Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Seat bight anchorages and attachments
ISO 13218:1998
Road vehicles. Child restraint systems. Report form for accidents involving child passengers
ISO 13226:1999
Rubber. Standard reference elastomers (SRE's) for characterizing the effect of liquids on vulcanized rubbers
ISO 13230:1999
Ophthalmic optics. Bar code specifications
ISO/IEC TR 13233:1995
Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services
ISO/IEC 13235-1:1998
Information technology. Open distributed processing. Trading function. Specification
ISO/IEC 13235-3:1998
Information technology. Open distributed processing. Trading function. Provision of trading function using OSI Directory service
ISO/IEC 13236:1998
Information technology. Quality of service:Framework
ISO/IEC 13238-3:1998
Information technology. Data management. IRDS export/import facility
ISO/IEC 13241:1997
Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Route restriction class additional network feature
ISO/IEC 13242:1997
Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Route restriction class additional network feature
ISO/IEC TR 13243:1999
Information technology. Quality of service. Guide to methods and mechanisms
ISO/IEC 13246:1997
Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Inter-exchange signalling protocol. Signalling ATM adaptation layer
ISO/IEC 13247:1997
Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Inter-exchange signalling protocol. Basic call/connection control
ISO/IEC 13248-1:1998
Information technology. Open systems interconnection. The directory. Protocol implementation conformance statement (PICS) proforma for the directory access protocol
ISO/IEC 13248-3:1998
Information technology. Open systems interconnection. The directory. Protocol implementation conformance statement (PICS) proforma for the directory operational binding management protocol
ISO/IEC 13248-4:1998
Information technology. Open systems interconnection. The directory. Protocol implementation conformance statement (PICS) proforma for the directory information shadowing protocol
ISO/IEC 13249-1:2002
Information technology. Database languages. SQL multimedia and application packages. Framework
ISO/IEC 13249-2:2000
Information technology. Database languages. SQL multimedia and application packages. Full-text
ISO/IEC 13249-3:1999
Information technology. Database languages. SQL multimedia and application packages. Spatial
ISO/IEC 13249-5:2001
Information technology. Database languages. SQL multimedia and application packages. Still image
ISO/IEC 13249-6:2002
Information technology. Database languages. SQL multimedia and application packages. Data mining
ISO/IEC 13250:2000
Information technology. SGML applications. Topic maps
ISO 13284:2003
Fork-lift trucks. Fork-arm extensions and telescopic fork arms. Technical characteristics and strength requirements
ISO 13294:1997
Dental handpieces. Dental air-motors
ISO 13295:1997
Dental rotary instruments. Mandrels
ISO 13296:1997
Diesel engines. High pressure fuel injection pipe assemblies. General requirements and dimensions
ISO 13297:2001
Small craft. Electrical systems. Alternating current installations
ISO 13299:2003
Sensory analysis. Methodology. General guidance for establishing a sensory profile
ISO 13302:2003
Sensory analysis. Methods for assessing modifications to the flavour of foodstuffs due to packaging
ISO 13310:1997
Iron ores. Determination of zinc content. Flame atomic absorption spectrometric method
ISO 13311:1997
Iron ores. Determination of lead content. Flame atomic absorption spectrometric method
ISO 13312:1997
Iron ores. Determination of potassium content. Flame atomic absorption spectrometric method
ISO 13313:1997
Iron ores. Determination of sodium content. Flame atomic absorption spectrometric method
ISO 13317-1:2001
Determination of particle size distribution by gravitational liquid sedimentation methods. General principles and guidelines
ISO 13317-2:2001
Determination of particle size distribution by gravitational liquid sedimentation methods. Fixed pipette method
ISO 13317-3:2001
Determination of particle size distribution by gravitational liquid sedimentation methods. X-ray gravitational technique
ISO 13318-1:2001
Determination of particle size distribution by centrifugal liquid sedimentation methods. General principles and guidelines
ISO 13318-2:2001
Determination of particle size distribution by centrifugal liquid sedimentation methods. Photocentrifuge method
ISO 13319:2000
Determination of particle size distributions. Electrical sensing zone method
ISO 13320-1:1999
Particle size analysis. Laser diffraction methods. General principles
ISO 13323-1:2000
Determination of particle size distribution. Single-particle light interaction methods. Light interaction considerations
ISO 13332:2000
Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
ISO/IEC TR 13335-1:1996
Information technology. Guidelines for the management of IT security. Concepts and models for IT Security
ISO/IEC TR 13335-2:1997
Information technology. Guidelines for the management of IT security. Managing and planning IT Security
ISO/IEC TR 13335-3:1998
Information technology. Guidelines for the management of IT security. Techniques for the management of IT security
ISO/IEC TR 13335-5:2001
Information technology. Guidelines for the management of IT security. Management guidance of network security
ISO 13337:1998
Spring-type straight pins. Slotted, light duty
ISO 13340:2001
Transportable gas cylinders. Cylinder valves for non-refillable cylinders. Specification and prototype testing
ISO 13341:1998
Transportable gas cylinders. Fitting of valves to gas cylinders
ISO 13344:1996
Determination of the lethal toxic potency of fire effluents
ISO 13355:2001
Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test
ISO 13357-1:2002
Petroleum products. Determination of the filterability of lubricating oils. Procedure for oils in the presence of water
ISO 13359:1998
Measurement of conductive liquid flow in closed conduits. Flanged electromagnetic flowmeters. Overall length
ISO 13362:2000
Flexible cellular polymeric materials. Determination of compression set under humid conditions
ISO 13366-1:1997
Milk. Enumeration of somatic cells. Microscopic method
ISO 13366-2:1997
Milk. Enumeration of somatic cells. Method using an electronic particle counter
ISO 13366-3:1997
Milk. Enumeration of somatic cells. Fluoro-opto-electronic method
ISO 13370:1998
Thermal performance of buildings. Heat transfer via the ground. Calculation methods
ISO 13373-1:2002
Condition monitoring and diagnostics of machines. Vibration condition monitoring. General procedures
ISO 13374-1:2003
Condition monitoring and diagnostics of machines. Data processing, communication and presentation. General guidelines
ISO/TR 13387-1:1999
Fire safety engineering. Application of fire performance concepts to design objectives
ISO/TR 13387-2:1999
Fire safety engineering. Design fire scenarios and design fires
ISO/TR 13387-3:1999
Fire safety engineering. Assessment and verification of mathematical fire models
ISO/TR 13387-4:1999
Fire safety engineering. Initiation and development of fire and generation of fire effluents
ISO/TR 13387-5:1999
Fire safety engineering. Movement of fire effluents
ISO/TR 13387-6:1999
Fire safety engineering. Structural response and fire spread beyond the enclosure of origin
ISO/TR 13387-7:1999
Fire safety engineering. Detection, activation and suppression
ISO/TR 13387-8:1999
Fire safety engineering. Life safety. Occupant behaviour, location and condition
ISO 13395:1996
Water quality. Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
ISO 13397-1:1996
Periodontal curettes, dental scalers and excavators. General requirements
ISO 13397-2:1997
Periodontal curettes, dental scalers and excavators. Periodontal curettes. Gr-type
ISO 13397-3:1997
Periodontal curettes, dental scalers and excavators. Dental scalers. H-type
ISO 13397-4:1998
Periodontal curettes, dental scalers and excavators. Dental excavators. Discoid type
ISO 13402:2001
Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure
ISO 13405-1:1996
Prosthetics and orthotics. Classification and description of prosthetic components. Classification of prosthetic components
ISO 13405-2:1996
Prosthetics and orthotics. Classification and description of prosthetic components. Description of lower-limb prosthetic components
ISO 13405-3:1996
Prosthetics and orthotics. Classification and description of prosthetic components. Description of upper-limb prosthetic components
ISO 13406-1:1999
Ergonomic requirements for work with visual display based on flat panels. Introduction
ISO 13406-2:2002
Ergonomic requirements for work with visual display based on flat panels. Ergonomic requirements for flat panel displays
ISO 13407:1999
Human-centred design processes for interactive systems
ISO 13419:2003
Space data and information transfer systems. Packet telemetry
ISO/IEC 13421:1993
Information technology. Data interchange on 12,7 mm, 48-track magnetic tape cartridges. DLT 1 format
ISO/IEC 13422:1994
Information technology. Data interchange on 90 mm flexible disk cartridges 10 MByte capacity using sector servo tracking. ISO type 304
ISO 13426-1:2003
Geotextiles and geotextile-related products. Strength of internal structural junctions. Geocells
ISO 13427:1998
Geotextiles and geotextile-related products. Abrasion damage simulation (sliding block test).
ISO 13431:1999
Geotextiles and geotextiles-related products. Determination of tensile creep and creep rupture behaviour
ISO 13437:1998
Geotextiles and geotextile-related products. Method for installing and extracting samples in soil, and testing specimens in laboratory
DD ENV ISO 13438:2000
Geotextiles and geotextile-related products. Screening test method for determining the resistance to oxidation
ISO 13443:1996
Natural gas. Standard reference conditions
ISO 13450:1996
Photography. 110-size cartridge, film and backing paper. Dimensions
ISO 13463:1999
Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel. Guidelines to help in the definition of a product specification
ISO 13468-1:1997
Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
ISO 13468-2:1999
Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
ISO 13472-1:2002
Acoustics. Measurement of sound absorption properties of road surfaces $7Iin situ$7R. Extended surface method
ISO 13473-2:2002
Characterization of pavement texture by use of surface profiles. Terminology and basic requirements related to pavement texture profile analysis
ISO 13473-3:2002
Characterization of pavement texture by use of surface profiles. Specification and classification of profilometers
DD ISO/TS 13474:2003
Acoustics. Impulse sound propagation for environmental noise assessment
ISO 13475-1:1999
Acoustics. Stationary audible warning devices used outdoors. Field measurements for determination of sound emission quantities
ISO 13476:1997
Road vehicles. Ignition coils. Electrical characteristics and test methods
ISO 13478:1997
Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test
ISO 13479:1997
Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack growth on notched pipes (notch test)
ISO/IEC 13481:1993
Information technology. Data interchange on 130 mm optical disk cartridges. Capacity: 1 gigabyte per cartridge
ISO 13485:2001
Quality systems. Medical devices. Particular requirements for the application of EN ISO 9001
ISO 13485:2003
Medical devices. Quality management systems. Requirements for regulatory purposes
ISO 13486-1:1999
Road vehicles. Hydraulic braking systems. Double-flare pipes, tapped holes, male fittings and tube seats
ISO 13488:2001
Quality systems. Medical devices. Particular requirements for the application of EN ISO 9002
ISO 13491-1:1998
Banking. Secure cryptographic devices (retail). Concepts, requirements and evaluation methods
ISO 13491-2:2000
Banking. Secure cryptographic devices (retail). Security compliance checklists for devices used in magnetic stripe cards systems
ISO 13492:1998
Banking. Key management related data element (retail)
ISO 13500:1999
Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
ISO 13503-1:2003
Petroleum and natural gas industries. Completion fluids and materials. Measurement of viscous properties of completion fluids
ISO/IEC 13522-1:1997
Information technology. Coding of multimedia and hypermedia information. MHEG object representation. Base notation (ASN.1)
ISO/IEC 13522-3:1997
Information technology. Coding of multimedia and hypermedia information. MHEG script interchange representation
ISO/IEC 13522-4:1996
Information technology. Coding of multimedia and hypermedia information. MHEG registration procedure
ISO/IEC 13522-5:1997
Information technology. Coding of multimedia and hypermedia information. Support for base-level interactive applications
ISO/IEC 13522-6:1998
Information technology. Coding of multimedia and hypermedia information. Support for enhanced interactive applications
ISO/IEC 13522-7:2001
Information technology. Coding of multimedia and hypermedia information. Interoperability and conformance testing for ISO/IEC 13522-5
ISO/IEC 13522-8:2001
Information technology. Coding of multimedia and hypermedia information. XML notation for ISO/IEC 13522-5
DD ENV ISO 13530:1999
Water quality. Guide to analytical quality control for water analysis
ISO 13533:2002
Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
ISO 13534:2001
Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and re-manufacture of hoisting equipment
ISO 13535:2001
Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment
ISO 13542:1995
Paper and board. Specification for internal diameters of cores for reels
ISO/IEC 13549:1993
Information technology. Data interchange on 130 mm optical disk cartridges. Capacity: 1,3 gigabytes per cartridge
ISO 13555-1:2003
Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Preconditioning
ISO 13555-2:2003
Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Test method
ISO 13556:1998
Road vehicles. Localization of exhaust system leaks and equipment specifications
ISO/IEC TR 13561:1994
Information technology. Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090
ISO 13562-1:2000
Industrial variable-reach trucks. Stability tests
ISO 13562-2:2001
Industrial variable-reach trucks. Additional stability tests for trucks handling freight containers of length 6m and above
ISO 13563-1:2001
Single side loading fork-lift trucks. Stablity tests
ISO 13565-1:1998
Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Filtering and general measurement conditions
ISO 13565-2:1998
Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the linear material ration curve
ISO 13565-3:2000
Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the material probability curve
ISO 13567-1:2002
Technical product documentation. Organization and naming of layers for CAD. Overview and principles
ISO 13567-2:2002
Technical product documentation. Organization and naming of layers for CAD. Concepts, format and codes used in construction documentation
ISO/IEC 13568:2002
Information technology. Z formal specification notation. Syntax, type system and semantics
ISO/IEC 13575:1995
Information technology. Telecommunications and information exchange between systems. 50-pole interface connector mateability dimensions and contact number assignments
ISO 13583-1:2000
Centrifugally cast steel and alloy products. General testing and tolerances
ISO 13584-20:1998
Industrial automation systems and integration. Parts library. Logical resource. Logical model of expressions
ISO 13584-42:1998
Industrial automation systems and integration. Parts library. Description methodology: Methodology for structuring part families
ISO 13586:2000
Plastics. Determination of fracture toughness ($iG$di$dc and $iK$di$dc). Linear elastic fracture mechanics (LEFM) approach
ISO 13591:1997
Small craft. Portable fuel systems for outboard motors
ISO 13592:1998
Small craft. Backfire flame control for petrol engines
ISO 13616:1997
Banking and related financial services. International bank account number (IBAN)
ISO 13617:2001
Ships and marine technology. Shipboard incinerators. Requirements
ISO 13625:2002
Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
ISO 13628-1:1999
Petroleum and natural gas industries. Design and operation of subsea production systems. General requirements and recommendations
ISO 13628-2:2001
Petroleum and natural gas industries. Design and operation of subsea production systems. Flexible pipe systems for subsea and marine applications
ISO 13628-3:2001
Petroleum and natural gas industries. Design and operation of subsea production systems. Through flowline (TFL) systems
ISO 13628-4:1999
Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea wellhead and tree equipment
ISO 13628-5:2002
Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals
ISO 13628-6:2000
Petroleum and natural gas industries. Design and operation of subsea production systems. Design and operation of subsea controls
ISO 13628-8:2002
Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated vehicle (ROV) interfaces on subsea production systems
ISO 13628-9:2000
Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated tool (ROT) intervention systems
ISO 13631:2002
Petroleum and natural gas industries. Packaged reciprocating gas compressors
ISO 13640:1999
Building construction. Jointing products. Specifications for test substrates
ISO/IEC 13642:1996
Information technology. Elements of management information related to the OSI Physical Layer
ISO/IEC 13650-2:1997
Information technology. Open systems interconnection. Conformance test suite for the OSI TP protocol. Test management protocol specification
ISO 13651:1996
Plastics. Epoxy resins and related materials. Determination of total saponifiable chlorine
ISO 13653:1996
Optics and optical instruments. General optical test methods. Measurement of relative irradiance in the image field
ISO 13655:1996
Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
ISO 13656:2000
Graphic technology. Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs
ISO 13666:1999
Ophthalmic optics. Spectacle lenses. Vocabulary
ISO 13674-1:2003
Road vehicles. Test method for the quantification of on-centre handling. Weave test
ISO 13678:2000
Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing and line pipe
ISO 13679:2002
Petroleum and natural gas industries. Procedures for testing casing and tubing connections
ISO 13680:2002
Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions
ISO 13689:2001
Refrigerated light hydrocarbon fluids. Measurement of liquid levels in tanks containing liquefied gases. Microwave-type level gauge
ISO 13690:1999
Cereals, pulses and milled products. Sampling of static batches
ISO 13691:2002
Petroleum and natural gas industries. High-speed special-purpose gear units
ISO 13694:2001
Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
ISO 13696:2002
Optics and optical instruments. Test methods for radiation scattered by optical components
ISO 13702:1999
Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
ISO 13703:2001
Petroleum and natural gas industries. Design and installation of piping systems on offshore production platforms
ISO 13704:2001
Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
ISO 13705:2002
Petroleum and natural gas industries. Fired heaters for general refinery service
ISO 13706:2000
Petroleum and natural gas industries. Air cooled heat exchangers
ISO/IEC 13714:1995
Information technology. Document processing and related communication. User interface to telephone-based services. Voice messaging applications
ISO 13716:2000
Dentistry. Reversible-irreversible hydrocolloid impression material systems
ISO/TS 13725:2001
Hydraulic fluid power. Cylinders. Method for determining the buckling load
ISO 13726:1998
Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions
ISO 13731:2002
Ergonomics of the thermal environment. Vocabulary and symbols
ISO 13734:2001
Natural gas. Organic sulfur compounds used as odorants. Requirements and test methods
ISO 13736:1998
Petroleum products and other liquids. Determination of flash point. Abel closed cup method
ISO 13738:2000
Lubricants, industrial oils and related products (class L). Family E (internal combustion engine oils). Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
ISO/TR 13739:1998
Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships
ISO 13740:1998
Crude petroleum and petroleum products. Transfer accountability. Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels
ISO 13741-1:1998
Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography. Direct liquid injection method
ISO 13741-2:1998
Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography. Headspace method
ISO 13746:2000
Textile floor coverings. Guidelines for installation and use on stairs
ISO/IEC 13751:2001
Information technology. Programming languages, their environments and system software interfaces. Programming language Extended APL
ISO 13752:1998
Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference
ISO 13753:1999
Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
ISO 13756:1997
Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using sodium chloride or potassium chloride
ISO 13757:1996
Methods of test for petroleum and its products. Liquefied petroleum gases. Determination of oily residues. High temperature method
ISO 13758:1997
Methods of test for petroleum and its products. Liquefied petroleum gases. Assessment of the dryness of propane. Valve freeze method
ISO 13759:1997
Methods of test for petroleum and its products. Petroleum products. Determination of alkyl nitrate in diesel fuels. Spectrometric method
ISO 13760:2000
Plastics pipes for the conveyance of fluids under pressure. Miner's rule. Calculation method for cumulative damage
DD ISO/TS 13762:2001
Particle size analysis. Small angle X-ray scattering method
ISO 13769:2002
Gas cylinders. Stamp marking
ISO 13772:1997
Forestry machinery. Portable chainsaws. Non-manually actuated chain brake performance
ISO 13774:1998
Rubber and plastics hoses for fuels for internal combustion engines. Method of test for flammability
ISO 13775-1:2000
Thermoplastic tubing and hoses for automotive use. Non-fuel applications
ISO 13775-2:2000
Thermoplastic tubing and hoses for automotive use. Petroleum-based fuel applications
ISO 13778:1999
Plain bearings. Quality assurance of thin-walled half bearings. Selective assembly of bearings to achieve a narrow clearance range
ISO 13779-1:2000
Impants for surgery. Hydroxyapatite. Ceramic hydroxyapatite
ISO 13779-2:2000
Impants for surgery. Hydroxyapatite. Coatings of hydroxyapatite
ISO 13779-4:2002
Implants for surgery. Hydroxyapatite. Determination of coating adhesion strength
ISO 13783:1998
Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure
ISO 13786:1999
Thermal performance of building components. Dynamic thermal characteristics. Calculation methods
ISO 13787:2003
Thermal insulation products for building equipment and industrial installations. Determination of declared thermal conductivity
ISO 13788:2002
Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods
ISO 13789:1999
Thermal performance of buildings. Transmission heat loss coefficient. Calculation method
ISO 13793:2001
Thermal performance of buildings. Thermal design of foundations to avoid frost heave
ISO 13794:1999
Ambient air. Determination of asbestos fibres. Indirect-transfer transmission electron microscopy method
ISO 13802:1999
Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
ISO 13804:1999
Vitreous and porcelain enamels for aluminium. Production of specimens for testing
ISO 13805:1999
Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
ISO 13806:1999
Vitreous and porcelain enamels. Corrosion tests in closed systems
ISO 13807:1999
Vitreous and porcelain enamels. Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
ISO/IEC 13813:1997
Information technology. Programming languages. Generic packages of real and complex type declarations and basic operations for Ada (including vector and matrix types)
ISO/IEC 13814:1998
Information technology. Programming languages. Generic package of complex elementary functions for Ada
ISO/IEC 13816:1997
Information technology. Programming languages, their environments and system software interfaces. Programming language ISLISP
ISO/IEC 13817-1:1996
Information technology. Programming languages, their environments and system software interfaces. Vienna Development Method. Specification language. Base language
ISO/IEC 13818-1:1997
Information technology. Generic coding of moving pictures and associated audio information. Systems
ISO/IEC 13818-3:1996
Information technology. Generic coding of moving pictures and associated audio information. Audio
ISO/IEC TR 13818-5:1997
Information technology. Generic coding of moving pictures and associated audio information. Software simulation
ISO/IEC 13818-9:2001
Information technology. Generic coding of moving pictures and associated audio information. Extension for real time interface for systems decoders
ISO 13820:1996
Paper, board and corrugated fibreboard. Description and calibration of compression testing equipment
ISO 13821:2001
Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
DD ENV ISO/TR 13843:2001
Water quality. Guidance on validation of microbiological methods
ISO 13844:2000
Plastics piping systems. Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes. Test method for leaktightness under negative pressure
ISO 13845:2000
Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes. Test method for leaktightness under internal pressure and with angular deflection
ISO 13846:2001
Plastics piping systems. End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping. Test method for long-term leaktightness under internal water pressure
ISO 13849-2:2003
Safety of machinery. Safety-related parts of control systems. Validation
ISO/IEC 13863:1998
Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Path replacement additional network feature
ISO/IEC 13865:1995
Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Specification, functional model and information flows. Call transfer supplementary service
ISO/IEC 13871:1995
Information technology. Telecommunications and information exchange between systems. Private telecommunications networks. Digital channel aggregation
ISO/IEC 13874:1999
Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Path replacement additional network feature
ISO 13879:1999
Petroleum and natural gas industries. Content and drafting of functional specifications
ISO 13880:1999
Petroleum and natural gas industries. Content and drafting of a technical specification
ISO 13884:2003
Animal and vegetable fats and oils. Determination of isolated trans isomers by infrared spectrometry
ISO/IEC 13886:1996
Information technology. Language independent procedure calling (LIPC)
ISO/IEC 13888-1:1997
Information technology. Security techniques. Non-repudiation. General
ISO/IEC 13888-2:1998
Information technology. Security techniques. Non-repudiation. Mechanisms using symmetric techniques
ISO/IEC 13888-3:1997
Information technology. Security techniques. Non-repudiation. Mechanisms using asymmetric techniques
ISO 13894-1:2000
High-pressure decorative laminates. Composite elements. Test methods
ISO 13900:2002
Steel. Determination of boron content. Curcumin spectrophotometric method after distillation
ISO 13909-1:2001
Hard coal and coke. Mechanical sampling. General introduction
ISO 13909-2:2001
Hard coal and coke. Mechanical sampling. Sampling from moving streams
ISO 13909-3:2001
Hard coal and coke. Mechanical sampling. Coal. Sampling from stationary lots
ISO 13909-4:2001
Hard coal and coke. Mechanical sampling. Coal. Preparation of test samples
ISO 13909-5:2001
Hard coal and coke. Mechanical sampling. Sampling from moving streams
ISO 13909-6:2001
Hard coal and coke. Mechanical sampling. Coke. Preparation of test samples
ISO 13909-7:2001
Hard coal and coke. Mechanical sampling. Methods for determining the precision of sampling, sample preparation and testing
ISO 13909-8:2001
Hard coal and coke. Mechanical sampling. Methods of testing for bias
ISO 13916:1997
Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 13918:1998
Welding. Studs and ceramic ferrules for arc stud welding
ISO 13919-1:1997
Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections. Steel
ISO 13919-2:2001
Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections. Aluminium and its weldable alloys
ISO 13920:1997
Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position
ISO/IEC 13923:1996
Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS-2 format using 120 m length tape
ISO 13927:2003
Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
ISO TR 13928:1994
Application guide for ISO 10755, ISO 10756, ISO 10757, ISO 10758 and ISO 10759
ISO 13929:2001
Small craft. Steering gear. Geared link systems
ISO 13934-1:1999
Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method
ISO 13934-2:1999
Textiles. Tensile properties of fabrics. Determination of maximum force using the grab method
ISO 13935-1:1999
Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the strip method
ISO 13935-2:1999
Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the grab method
ISO 13937-1:2000
Textiles. Tear properties of fabrics. Determination of tear force using ballistic pendulum method (Elmendorf)
ISO 13937-2:2000
Textiles. Tear properties of fabrics. Determination of tear force of trouser-shaped test specimens (single tear method)
ISO 13937-3:2000
Textiles. Tear properties of fabrics. Determination of tear force of wing-shaped test specimens (single tear method)
ISO 13937-4:2000
Textiles. Tear properties of fabrics. Determination of tear force of tongue-shaped test specimens (double tear test)
ISO 13938-1:1999
Textiles. Bursting properties of fabrics. Hydraulic method for determination of bursting strength and bursting distension
ISO 13938-2:1999
Textiles. Bursting properties of fabrics. Pneumatic method for determination of bursting strength and bursting distension
ISO 13942:2000
Bonded abrasive products. Limit deviations and run-out tolerances
ISO 13943:2000
Fire safety. Vocabulary
ISO 13953:2001
Polyethelene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
ISO/IEC 13962:1995
Information technology. Data interchange on 12,7 mm, 112-track magnetic tape cartridges. DLT 2 format
ISO/IEC 13963:1995
Information technology. Data interchange on 90 mm optical disk cartridges. Capacity: 230 megabytes per cartridge
ISO 13964:1998
Air quality. Determination of ozone in ambient air. Ultraviolet photometric method
ISO/TR 13989-1:2000
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears. Flash temperature method
ISO/TR 13989-2:2000
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears. Integral temperature method
ISO 13994:1998
Clothing for protection against liquid chemicals. Determination of the resistance of protective clothing materials to penetration by liquids under pressure
ISO 13995:2001
Protective clothing. Mechanical properties. Test method for the determination of the resistance to puncture and dynamic tearing of materials
ISO 13997:1999
Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
ISO 13998:2003
Protective clothing. Aprons, trousers and vests protecting against cuts and staby hand knives
ISO 14001:1996
Environmental management systems. Specification with guidance for use
ISO 14004:1996
Environmental management systems. General guidelines on principles, systems and supporting techniques
ISO 14015:2001
Environmental management. Environmental assessment of sites and organizations (EASO)
ISO 14020:2001
Environmental labels and declarations. General principles
ISO 14021:2001
Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling)
ISO 14024:2001
Environmental labels and declarations. Type I environmental labelling. Principles and procedures
ISO 14031:2000
Environmental management. Environmental performance evaluation. Guidelines
ISO 14040:1997
Environmental management. Life cycle assessment. Principles and framework
ISO 14041:1998
Environmental management. Life cycle assessment. Goal and scope definition and inventory analysis
ISO 14042:2000
Environmental management. Life cycle management. Life cycle impact assessment
ISO 14043:2000
Environmental management. Life cycle assessment. Life cycle interpretation
DD ISO/TS 14048:2002
Environmental management. Life cycle assessment. Data documentation format
ISO 14050:2002
Environmental management. Vocabulary
ISO 14111:1999
Natural gas. Guidelines to traceability in analysis
ISO 14113:1997
Gas welding equipment. Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar
ISO 14114:1999
Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements
ISO 14122-1:2001
Safety of machinery. Permanent means of access to machinery. Choice of a fixed means of access between two levels
ISO 14122-2:2001
Safety of machinery. Permanent means of access to machinery. Working platforms and walkways
ISO 14122-3:2001
Safety of machinery. Permanent means of access to machinery. Stairways, stepladders and guard-rails
ISO 14125:1998
Fibre-reinforced plastic composites. Determination of flexural properties
ISO 14126:1999
Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
ISO 14129:1998
Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the $0P 45$0D tension test method
ISO 14130:1998
Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method
ISO 14137:2000
Machine tools. Test conditions for wire electrical-discharge machines (wire EDM). Terminology and testing of the accuracy
ISO 14139:2000
Hydrometric determinations. Flow measurements in open channels using structures. Compound gauging structures
ISO/IEC 14143-1:1998
Information technology. Software measurement. Functional size measurement. Definition of concepts
ISO/IEC 14143-2:2002
Information technology. Software measurement. Functional size measurement. Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998
ISO/IEC TR 14143-4:2002
Information technology. Software measurement. Functional size measurement. Reference model
ISO 14152:2001
Neutron radiation protection shielding. Design principles and considerations for the choice of appropriate materials
ISO 14155-1:2003
Clinical investigation of medical devices for human subjects. General requirements
ISO 14155-2:2003
Clinical investigation of medical devices for human subjects. Clinical investigation plans
ISO 14156:2001
Milk and milk products. Extraction methods for lipids and liposoluble compounds
ISO 14160:1998
Sterilization of single-use medical devices incorporating materials of animal origin. Validation and routine control of sterilization by liquid chemical sterilants
ISO 14161:2001
Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
ISO 14163:1998
Acoustics. Guidelines for noise control by silencers
ISO 14164:1999
Stationary source emissions. Determination of the volume flowrate of gas streams in ducts. Automated method
ISO 14168:2003
Metallic powders, excluding hardmetals. Method for testing copper-base infiltrating powders
ISO/TR 14179-1:2001
Gears. Thermal capacity. Rating gear drives with thermal equilibrium at 95$0DC sump temperature
ISO/TR 14179-2:2001
Gears. Thermal capacity. Thermal load carrying capacity
ISO 14180:1998
Solid mineral fuels. Guidance on the sampling of coal seams
ISO 14182:2000
Animal feeding stuff. Determination of residues of organophosphorus pesticides. Gas chromatographic method
ISO 14184-1:1999
Textiles. Determination of formaldehyde. Free and hydrolyzed formaldehyde (water extraction method)
ISO 14184-2:1998
Textiles. Determination of formaldehyde. Released formaldehyde (vapour absorption method)
ISO 14224:1999
Petroleum and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
ISO 14233:2003
Dentistry. Polymer-based die materials
ISO 14237:2000
Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials
ISO 14242-1:2002
Implants for surgery. Wear of total hip joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
ISO 14242-2:2000
Implants for surgery. Wear of total hip joint prostheses. Methods of measurement
ISO 14243-1:2002
Implants for surgery. Wear of total knee joint prostheses. Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-2:2000
Implants for surgery. Wear of total knee joint prostheses. Methods of measurement
ISO 14246:2001
Transportable gas cylinders. Gas cylinder valves. Manufacturing tests and inspections
ISO/IEC TR 14252:1996
Information technology. Guide to the POSIX open system environment (OSE)
ISO 14253-1:1999
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or non-conformance with specifications
DD ENV ISO 14253-2:2001
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 14257:2001
Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
ISO 14258:1998
Industrial automation systems. Concepts and rules for enterprise models
ISO 14268:2002
Leather. Physical and mechanical tests. Determination of water vapour permeability
ISO 14269-1:1997
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Vocabulary
ISO 14269-2:1997
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Heating, ventilating and air-conditioning test method and performance
ISO 14269-3:1997
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Determination of effect of solar heating
ISO 14269-4:1997
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Air filter element test method
ISO 14269-5:1997
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Pressurization system test method
ISO 14270:2001
Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
ISO 14271:2001
Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
ISO 14272:2001
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
ISO 14273:2001
Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
ISO 14275:2002
Aerospace. Drives, internal, offset cruciform, ribbed. Metric series
ISO 14276:2002
Aerospace. Drives, internal, offset cruciform. Metric series
ISO 14277:2002
Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series
ISO 14278:2002
Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
ISO 14279:2002
Aerospace. Drives, internal, cruciform. Metric series
ISO 14280:2002
Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series
ISO 14281:2002
Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
ISO 14284:2002
Steel and iron. Sampling and preparation of samples for the determination of chemical composition
ISO 14300-2:2002
Space systems. Programme management. Product assurance
ISO 14302:2002
Aerospace series. Space systems. Electromagnetic compatibility requirements
ISO 14303:2002
Space systems. Launch-vehicle-to-spacecraft interfaces
ISO 14310:2002
Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs
ISO 14315:1997
Specification for industrial wire screens
ISO 14324:2003
Resistance spot welding. Destructive tests of welds. Method for the fatigue testing of spot welded joints
ISO 14329:2003
Resistance welding. Destructive tests of welds. Failure types and geometric measurements for resistance spot, seam and projection welds
ISO 14356:2003
Dentistry. Duplicating material
ISO 14368-1:2000
Mineral and sapphire watch-glasses. Dimensions and tolerances
ISO 14368-2:2003
Mineral and sapphire watch-glasses. Assembly to the case by adhesive or using a gasket
ISO/IEC TR 14369:1999
Information technology. Programming languages, their environments and system software interfaces. Guidelines for the preparation of Language-Independent Service Specifications (LISS)
ISO 14372:2001
Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
ISO 14377:2002
Canned evaporated milk. Determination of tin content. Method using graphite furnace atomic absorption spectrometry
ISO 14378:2000
Milk and dried milk. Determination of iodide content. Method using high performance liquid chromatography
ISO/IEC 14392:1996
Information technology. Directory services. Application program interface (API) (language independent)
ISO/IEC 14393:1996
Information technology. Test methods for measuring conformance to directory services. Application program interface (API) (language independent)
ISO/IEC 14394:1996
Information technology. Directory services C language interfaces. Binding for application program interface (API)
ISO/IEC 14395:1996
Information technology. Test methods for measuring conformance to directory services C language interfaces. Binding for application program interface (API)
ISO 14396:2002
Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178
ISO 14397-1:2002
Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
ISO 14397-2:2002
Earth-moving machinery. Loaders and backhoe loaders. Test method for measuring breakout forces and lift capacity to maximum lift height
ISO 14402:1999
Water quality. Determination of phenol index by flow analysis (FIA and CFA)
ISO 14403:2002
Water quality. Determination of total cyanide and free cyanide by continuous flow analysis
ISO 14408:1998
Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
ISO 14419:1999
Textiles. Oil repellency. Hydrocarbon resistance test
ISO 14438:2002
Glass in building. Determination of energy balance value. Calculation method
ISO/IEC 14443-1:2000
Identification cards. Contactless integrated circuit(s) cards. Proximity cards. Physical characteristics
ISO/IEC 14443-2:2001
Identification cards. Contactless integrated circuit(s) cards. Proximity cards. Radio frequency power and signal interface
ISO/IEC 14443-3:2001
Identification cards. Contactless integrated circuit(s) cards. Proximity cards. Initialization and anticollision
ISO/IEC 14443-4:2001
Identification cards. Contactless integrated circuit(s) cards. Proximity cards. Transmission protocol
ISO 14453:2000
Pulps. Determination of acetone-soluble matter
ISO 14460:1999
Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods
ISO/IEC TR 14471:1999
Information technology. Software engineering. Guidelines for the adoption of CASE tools
ISO/IEC 14478-1:1998
Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Fundamentals of PREMO
ISO/IEC 14478-2:1998 Version 2
Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Foundation component
ISO/IEC 14478-3:1998
Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Multimedia systems services
ISO/IEC 14478-4:1998
Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Modelling, rendering and interaction component
ISO 14487:1997
Pulps. Standard water for physical testing
ISO/IEC 14495-1:1999
Information technology. Lossless and near-lossless compression of continuous-tone still images. Baseline (CD-ROM)
ISO 14500:2003
Textile machinery and accessories. Harnesses for Jacquard weaving machines. Vocabulary
ISO 14501:1999
Milk and milk powder. Determination of aflatoxin M$d1 content. Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography
ISO 14507:2003
Soil quality. Pretreatment of samples for determination of organic contaminants
ISO 14508:1997
Road vehicles. Spark plugs. Terminals
ISO 14509:2001
Small craft. Measurement of airborne sound emitted by powered recreational craft
ISO 14511:2001
Measurement of fluid flow in closed conduits. Thermal mass flowmeters
ISO 14512:1999
Passenger cars. Straight-ahead braking on surfaces with split coefficient of friction. Open-loop test method
ISO/IEC 14515-1:2000
Information technology. Portable Operating Systems Interface (POSIX). Test methods for measuring conformance to POSIX. System interfaces
ISO/IEC TR 14516:2002
Information technology. Security techniques. Guidelines for the use and management of trusted third party services
ISO/IEC 14517:1996
Information technology. 130 mm optical disk cartridges for information interchange. Capacity: 2,6 Gbytes per cartridge
ISO/IEC 14519:2001
Information technology. POSIX Ada language interfaces. Binding for system application program interface (API)
ISO 14520-1:2000
Gaseous fire-extinguishing systems. Physical properties and system design. General requirements
ISO 14520-2:2000
Gaseous fire-extinguishing systems. Physical properties and system design. CFDOWN3I extinguishant
ISO 14520-3:2000
Gaseous fire-extinguishing systems. Physical properties and system design. FC-2-1-8 extinguishant
ISO 14520-4:2000
Gaseous fire-extinguishing systems. Physical properties and system design. FC-3-1-10 extinguishant
ISO 14520-6:2000
Gaseous fire-extinguishing systems. Physical properties and system design. HCFC Blend A extinguishant
ISO 14520-7:2000
Gaseous fire-extinguishing systems. Physical properties and system design. HCFC Blend 124 extinguishant
ISO 14520-8:2000
Gaseous fire-extinguishing systems. Physical properties and system design. HCFC 125 extinguishant
ISO 14520-9:2000
Gaseous fire-extinguishing systems. Physical properties and system design. HFC 227ea extinguishant
ISO 14520-10:2000
Gaseous fire-extinguishing systems. Physical properties and system design. HFC 23 extinguishant
ISO 14520-11:2000
Gaseous fire-extinguishing systems. Physical properties and system design. HFC 236fa extinguishant
ISO 14520-12:2000
Gaseous fire-extinguishing systems. Physical properties and system design. IG-01 extinguishant
ISO 14520-13:2000
Gaseous fire-extinguishing systems. Physical properties and system design. IG-100 extinguishant
ISO 14520-14:2000
Gaseous fire-extinguishing systems. Physical properties and system design. IG-55 extinguishant
ISO 14520-15:2000
Gaseous fire-extinguishing systems. Physical properties and system design. IG-541 extinguishant
ISO 14524:1999
Photography. Electronic still-picture cameras. Methods for measuring opto-electronic conversion functions (OECFs)
ISO 14526-1:2000
Plastics. Phenolic powder moulding compounds (PF-PMCs). Designation system and basis for specifications
ISO 14526-2:2000
Plastics. Phenolic powder moulding compounds (PF-PMCs). Preparation of test specimens and determination of properties
ISO 14526-3:2000
Plastics. Phenolic powder moulding compounds (PF-PMCs). Requirements for selected moulding compounds
ISO 14527-1:2000
Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs). Designation system and basis for specifications
ISO 14527-2:2000
Preparation of test specimens and determination of properties
ISO 14527-3:2000
Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs). Requirements for selected moulding compounds
ISO 14528-1:2000
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Designation system and basis for specifications
ISO 14528-2:2000
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Preparation of test specimens and determination of properties
ISO 14528-3:2000
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Requirements for selected moulding compounds
ISO 14529-1:2000
Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Designation system and basis for specifications
ISO 14529-2:2000
Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Preparation of test specimens and determination of properties
ISO 14529-3:2000
Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Requirements for selected moulding compounds
ISO 14530-1:2000
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Designation system and basis for specifications
ISO 14530-2:2000
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Preparation of test specimens and determination of properties
ISO 14530-3:2000
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Requirements for selected moulding compounds
ISO 14531-1:2002
Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Pipes
ISO 14532:2001
Natural gas. Vocabulary
ISO 14534:2002
Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
ISO 14535:2001
Photography. Room-light loading packages for electronic scanners and image-setting film and paper rolls. Dimensions and related requirements
ISO 14539:2001
Manipulating industrial robots. Object handling with grasp-type grippers. Vocabulary and presentation of characteristics
ISO 14546:2000
Photography. Aerial films and spools. Dimensions
ISO 14554-1:2001
Quality requirements for welding. Resistance welding of metallic materials. Comprehensive quality requirements
ISO 14554-2:2001
Quality requirements for welding. Resistance welding of metallic materials. Elementary quality requirements
ISO 14555:1998
Welding. Arc stud welding of metallic materials
ISO 14556:2000
Steel. Charpy V-notch pendulum impact test. Instrumented test method
ISO 14558:2000
Rubber. Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
ISO 14565:2001
Animal feeding stuffs. Determination of vitamin A content. Method using high-performance liquid chromatography
ISO/IEC 14568:1997
Information technology. DXL. Diagram exchange language for tree-structured charts
ISO 14577-1:2002
Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
ISO 14577-2:2002
Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
ISO 14577-3:2002
Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
ISO 14579:2001
Hexalobular socket head cap screws
ISO 14580:2001
Hexalobular socket cheese head screws
ISO 14583:2001
Hexalobular socket pan head screws
ISO 14584:2001
Hexalobular socket raised countersunk head screws
ISO 14585:2001
Hexalobular socket pan head tapping screws
ISO 14586:2001
Hexalobular socket countersunk head tapping screws
ISO 14587:2001
Hexalobular socket raised countersunk (oval) head tapping screws
ISO 14588:2001
Blind rivets. Terminology and definitions
ISO 14589:2001
Blind rivets. Mechanical testing
ISO 14592-1:2002
Water quality. Evaluation of the aerobic biodegradability of organic compounds at low concentrations. Shake-flask batch test with surface water or surface water/sediment suspensions
ISO 14592-2:2002
Water quality. Evaluation of the aerobic biodegradability of organic compounds at low concentrations. Continuous flow river model with attached biomass
ISO 14596:1998
Methods of test for petroleum and its products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry
ISO 14597:1999
Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry
ISO/IEC 14598-1:1999
Information technology. Software production evaluation. General overview
ISO/IEC 14598-2:2000
Information technology. Software production evaluation. Planning and management
ISO/IEC 14598-3:2000
Information technology. Software production evaluation. Process for developers
ISO/IEC 14598-4:1999
Information technology. Software production evaluation. Process for acquirers
ISO/IEC 14598-5:1998
Information technology. Software production evaluation. Process for evaluators
ISO/IEC 14598-6:2001
Information technology. Software production evaluation. Documentation of evaluation modules
ISO 14602:1998
Non-active surgical implants. Implants for osteosynthesis. Particular requirements
ISO 14606:2000
Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
ISO 14615:1997
Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load
ISO 14616:1997
Plastics. Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of the shrinkage stress and contraction stress
ISO 14620-1:2002
Space systems. Safety requirements. System safety
ISO 14630:1998
General requirements for non-active surgical implants
ISO 14631:1999
Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
ISO 14632:1999
Extruded sheets of polyethylene (PE-HD). Requirements and test methods
ISO 14635-1:2000
Gears. FZG test procedures. FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils
ISO 14644-1:1999
Cleanrooms and associated controlled environments. Classification of air cleanliness
ISO 14644-2:2000
Cleanrooms and associated controlled environments. Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
ISO 14644-4:2001
Cleanrooms and associated controlled environments. Design, construction and start-up
ISO 14647:2000
Metallic coatings. Determination of porosity on gold coatings on metallic substrates. Nitric acid vapour test
ISO 14648-1:2001
Micrographics. Quality control of COM recorders that generate images using a single internal display system. Characteristics of the software test target
ISO 14648-2:2001
Micrographics. Quality control of COM recorders that generate images using a single internal display system. Method of use
ISO/IEC 14651:2001
Information technology. International string ordering and comparision. Method for comparing character strings and description of the common template tailorable ordering
ISO 14654:1999
Epoxy-coated steel for the reinforcement of concrete
ISO 14656:1999
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
ISO 14660-1:2000
Geometrical Product Specifications (GPS). Geometrical features. General terms and definitions
ISO 14660-2:2000
Geometrical Product Specifications (GPS). Geometrical features. Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
ISO 14661:2000
Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
ISO/IEC 14662:1997
Information technology. Open-EDI reference model
ISO 14663-1:1999
Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Designation system and basis for specifications
ISO 14663-2:1999
Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO 14673-1:2001
Milk and milk products. Determination of nitrate and nitrite contents. Method using cadmium reduction and spectrometry
ISO 14673-2:2001
Milk and milk products. Determination of nitrate and nitrite contents. Method using segmented flow analysis (Routine method)
ISO 14673-3:2001
Milk and milk products. Determination of nitrate and nitrite contents. Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method)
ISO 14675:2003
Milk and milk products. Guidelines for a standardized description of competitive enzyme immunoassays. Determination of aflatoxin M$D1 content
ISO 14681:1998
Diesel engines. Fuel injection pump testing. Calibrating fuel injectors
ISO 14683:1999
Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
ISO 14686:2003
Hydrometric determinations. Pumping tests for water wells. Considerations and guidelines for design, performance and use
ISO 14688-1:2002
Geotechnical investigation and testing. Identification and classification of soil. Identification and description
ISO 14691:2000
Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. General purpose applications
ISO 14692-1:2002
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Vocabulary, symbols, applications and materials
ISO 14692-2:2002
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Qualification and manufacture
ISO 14692-3:2002
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. System design
ISO 14692-4:2002
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Fabrication, installation and operation
ISO 14695:2003
Fans for general purposes. Method of measurement of fan vibration
ISO/TR 14696:1999
Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL)
ISO/TR 14697:1997
Fire tests. Guidance on the choice of substrates for building products
ISO/IEC 14699:1997
Information technology. Open systems interconnection. Transport fast byte protocol
ISO/IEC 14700:1997
Information technology. Open systems interconnection. Network fast byte protocol
ISO 14706:2000
Surface chemical analysis. Determination of surface elemental contamination on silicon wafers by total-reflection X-ray flourescence (TXRF) spectroscopy
ISO 14707:2000
Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
ISO/IEC 14709-1:1997
Information technology. Configuration of customer premises cabling (CPC) for applications. ISDN basic access
ISO 14711:2003
Space systems. Unmanned mission operations concepts. Guidelines for defining and assessing concept products
ISO 14713:1999
Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines
ISO 14714:1998
Essential oils and aromatic extracts. Determination of residual benzene content
ISO 14721:2003
Space data and information transfer systems. Open archival information systems. Reference model
ISO 14723:2002
Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves
ISO 14726-1:2002
Ships and marine technology. Identification colours for the content of piping systems. Main colours and media
ISO 14727:1999
Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file
ISO 14729:2001
Ophthalmic optics. Contact lens care products. Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
ISO 14730:2000
Ophthalmic optics. Contact lens care products. Antimicrobial preservative efficacy testing and guidance on determining discard date
ISO 14738:2002
Safety of machinery. Anthropometric requirements for the design of workstations at machinery
ISO 14740:1998
Forestry machinery. Backpack power units for brush cutters, grass trimmers, pole cutters and similar appliances. Safety requirements and testing
ISO 14744-1:2001
Welding. Acceptance inspection of electron beam welding machines. Principles and acceptance conditions
ISO 14744-2:2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of accelerating voltage characteristics
ISO 14744-3:2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of beam current characteristics
ISO 14744-4:2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of welding speed
ISO 14744-5:2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of run-out accuracy
ISO 14744-6:2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of stability of spot position
ISO/IEC 14752:2000
Information technology. Open Distributed Processing. Protocol support for computational interactions
ISO/IEC 14753:1999
Information technology. Open distributed processing. Interface references and binding
ISO/IEC 14755:1997
Information technology. Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
ISO/IEC 14756:1999
Information technology. Measurement and rating of performance of computer-based software systems (CD-ROM)
ISO/IEC TR 14759:1999
Software engineering. Mock up and prototype. A categorization of software mock up and prototype models and their use
ISO/IEC 14764:1999
Information technology. Software maintenance
ISO/IEC 14765:1997
Information technology. Framework for protocol identification and encapsulation
ISO/IEC 14766:1997
Information technology. Telecommunications and information exchange between systems. Use of OSI applications over the internet transmission control protocol (TCP)
ISO/IEC 14769:2001
Information technology. Open distributed processing. Type repository function
ISO/IEC 14771:1999
Information technology. Open distributed. Processing. Naming framework
ISO 14793:2003
Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods
ISO 14801:2003
Dentistry. Fatigue test for endosseous dental implants
ISO 14807:2001
Photography. Transmission and reflection densitometers. Method for determining performance
ISO 14808:1997
Photography. Composition of 135-film canisters
DD ENV ISO 14815:2000
Road transport and traffic telematics. Automatic vehicle and equipment identification. System specification
DD ENV ISO 14816:2000
Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structures
DD ENV ISO 14819-3:2001
Traffic and travel information (TTI). TTI messages via traffic message coding. Location referencing for ALERT-C
DD ENV ISO 14825:1997
Geographic data files
ISO/IEC 14834:1996
Information technology. Distributed transaction processing. The XA specification
ISO 14839-1:2002
Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Vocabulary
ISO 14847:1999
Rotary positive displacement pumps. Technical requirements
ISO 14848:1998
Plastics. Unsaturated-polyester resins. Determination of reactivity at 130$0DC
ISO 14849:1999
Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method
ISO 14851:1999
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer
ISO 14852:1999
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
ISO 14855:1999
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide
ISO 14856:2001
Timekeeping instruments. Wristwatch cases. Fixing dimensions of non-spring-bar types
ISO 14865:1998
Machinery for forestry. Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source. Safety requirements and testing
ISO 14869-2:2002
Soil quality. Dissolution for the determination of total element content. Dissolution by alkaline fusion
ISO 14877:2002
Protective clothing for abrasive blasting operations using granular abrasives
ISO 14879-1:2000
Implants for surgery. Total knee-joint prostheses. Determination of endurance properties of knee tibial trays
ISO 14880-1:2001
Microlens array. Vocabulary
ISO 14881:2001
Integrated optics. Interfaces. Parameters relevant to coupling properties
ISO/IEC 14882:1998
Programming languages. C++
ISO 14887:2000
Sample preparation. Dispersing procedures for powders in liquids
ISO/IEC 14888-1:1998
Information technology. Security techniques. Digital signatures with appendix. General
ISO/IEC 14888-2:1999
Information technology. Security techniques. Digital signatures with appendix. Identity-based mechanisms
ISO/IEC 14888-3:1998
Information technology. Security techniques. Digital signatures with appendix. Certificate-based mechanisms
ISO 14889:2003
Ophthalmic optics. Spectacle lenses. Fundamental requirements for uncut finished lenses
ISO 14890:2003
Conveyor belts. Specification for rubber or plastics covered conveyor belts of textile construction for general use
ISO 14891:2002
Milk and milk products. Determination of nitrogen content. Routine method using combustion according to the Dumas principle
ISO 14895:2003
Small craft. Liquid-fuelled galley stoves
ISO 14896:2001
Plastics. Polyurethane raw materials. Determination of isocyanate content
ISO 14897:2002
Plastics. Polyols for use in the production of polyurethane. Determination of water content
ISO 14898:1999
Plastics. Polyurethane raw materials. Aromatic isocyanates. Determination of acidity
ISO 14899:2001
Plastics. Polyols for use in the production of polyurethane. Determination of basicity
ISO 14900:2001
Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number
ISO 14902:2001
Animal feeding stuffs. Determination of trypsin inhibitor activity of soya products
DD ENV ISO 14904:1997
Road transport and traffic telematics. Automatic fee collection (AFC). Interface specification for clearing between operators
DD ENV ISO 14906:1999
Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Application interface definition for dedicated short range communications
DD ENV ISO 14907-1:2001
Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment. Description of test procedures
ISO 14910-1:1997
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
ISO 14910-2:1997
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
ISO 14911:1999
Water quality. Determination of dissolved Li$u+, Na$d4$u+, NH$d4$u+, K$u+, Mn$u2$u+, Ca$u2$u+, Mg$u2$u+, Sr$u2$u+ and Ba$u2$u+ using ion chromatography. Method for water and waste water
ISO 14912:2003
Gas analysis. Conversion of gas mixture composition data
ISO 14915-1:2002
Software ergonomics for multimedia user interfaces. Design principles and framework
ISO 14915-2:2003
Software ergonomics for multimedia user interfaces. Multimedia navigation and control
ISO 14915-3:2002
Software ergonomics for multimedia user interfaces. Media selection and combination
ISO 14918:1998
Thermal spraying. Approval testing of thermal sprayers
ISO 14919:2001
Thermal spraying, Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions
ISO 14920:1999
Thermal spraying. Spraying and fusing of self-fluxing alloys
ISO 14921:2001
Thermal spraying. Procedure for the application of thermally sprayed coatings for engineering components
ISO 14922-1:1999
Thermal spraying. Quality requirements of thermally sprayed structures. Guidance for selection and use
ISO 14922-2:1999
Thermal spraying. Quality requirements of thermally sprayed structures. Comprehensive quality requirements
ISO 14922-3:1999
Thermal spraying. Quality requirements of thermally sprayed structures. Standard quality requirements
ISO 14922-4:1999
Thermal spraying. Quality requirements of thermally sprayed structures. Elementary quality requirements
ISO 14923:2003
Thermal spraying. Characterization and testing of thermally sprayed coatings
ISO 14935:1999
Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids
ISO 14937:2001
Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
ISO 14939:2001
Animal feeding stuffs. Determination of carbadox content. Method using high performance liquid chromatography
ISO 14946:2001
Small craft. Maximum load capacity
ISO 14949:2001
Implants for surgery. Two-part addition-cure silicone elastomers
ISO 14951-1:1999
Space systems. Fluid characteristics. Oxygen
ISO 14951-2:1999
Space systems. Fluid characteristics. Hydrogen propellant
ISO 14951-3:1999
Space systems. Fluid characteristics. Nitrogen
ISO 14951-4:1999
Space systems. Fluid characteristics. Helium
ISO 14951-5:1999
Space systems. Fluid characteristics. Nitrogen tetroxide propellant
ISO 14951-6:1999
Space systems. Fluid characteristics. Monomethylhydrazine propellant
ISO 14951-7:1999
Space systems. Fluid characteristics. Hydrazine propellant
ISO 14951-8:1999
Space systems. Fluid characteristics. Kerosene propellant
ISO 14951-9:1999
Space systems. Fluid characteristics. Argon
ISO 14951-10:1999
Space systems. Fluid characteristics. Water
ISO 14951-11:1999
Space systems. Fluid characteristics. Ammonia
ISO 14951-12:1999
Space systems. Fluid characteristics. Carbon dioxide
ISO 14951-13:1999
Space systems. Fluid characteristics. Breathing air
ISO 14953:2000
Space systems. Structural design. Determination of loading levels for static qualification testing of launch vehicles
ISO 14956:2002
Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
ISO 14961:2002
Space data and information transfer systems. Parameter value language specification
ISO 14964:2000
Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
ISO 14965:2000
Ambient air. Determination of total non-methane organic compounds. Cryogenic preconcentration and direct flame ionization detection method
ISO 14966:2002
Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
ISO 14968:1999
Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets
ISO 14971:2001
Medical devices. Application of risk management to medical devices
ISO 14972:1998
Sterile obturators for single use with over-needle peripheral intravascular catheters
ISO 14975:2000
Surface chemical analysis. Information formats
ISO 14976:1998
Surface chemical analysis. Data transfer format
ISO/IEC 14977:1996
Information technology. Syntactic Metalanguage. Extended BNF
ISO 14982:1998
Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
ISO 14985:1999
Hard-copy output of engineering drawings. Specification for the structure of control files
ISO 14997:2003
Optics and optical instruments. Test methods for surface imperfections of optical elements
| 
